PCB Identification

Ozbuoy

Newbie
Credits
6CR
Hi all,

Could anyone help me please identify what this PCB could potentially be?

I picked it up as part of a 5 card lot and it needs a little work and I don’t want to remove a ROM chip unless I really need to.

34907900-7001-4A21-B1CA-44B9749CA58D.jpeg
Ozbuoy2022-09-04 16:48:10
 

TheDaddy

Senior Member
vacBacker
Feedback
14 (93%)
Credits
7,230CR
Poss capcom , Just remove a rom if you can its easier and will needing verifying to repair anyway. Its missing the main CPU but sure you have noticed that.

Dave.
 

Ozbuoy

Newbie
Credits
6CR
Thanks for that, yep, noticed the missing main CPU ;-)

All the ROM’s are soldered to the board so I thought I would ask the question before I go and desolder them. I was hoping if someone could Identify the board, I would then be able to look for a compatible CPU. The board indicates 68000-12 and I have a nice TS68000CP12 that would fit in nicely, but would like to be sure first.

What’s thrown me is it looks as though it’s a 4 player board and what potential looks like a Konami logo on the ROM’s

395D18CF-F41D-412C-98C2-825C429B3D1F.jpeg
 

mysticmonk

Active member
Feedback
12 (100%)
Credits
1,051CR
EgTAA1IXgAYY346.jpg_large.jpg


Probably wrestlefest. Slight difference being the extra small board, but you see lots of boot pcbs with/without those additions, like the sega system1/2 boots.
 

Ozbuoy

Newbie
Credits
6CR
Thanks for the help, given the similarities between the boards (almost identical) I’d have to agree it’s the same game.

Do you happen to have the main CPU part number at all? I’d just like to make sure the one I have it compatible.

Thanks again
 

Ozbuoy

Newbie
Credits
6CR
Thanks both,

Gotta say if I can make this board sing, I’ll be a happy little chappy. I had been looking for a reason to build a 4 player cabinet. Originally it was for a TMNT/Simpson or NBA Jam but given I now have a board there no additional costs involved.
 
Top