PCB Repairs

andrewsm

Active member
Feedback
1 (100%)
Credits
485CR
As some of you already know, my tester is going very well and Im continuing to develop more for it however it has been suggested to me that I should offer a repair service to guys on their PCBS.

Well after some consideration I have decided to give it a go. I have over 35 years in the electronics industry and repairing digital systems is a hobby for me plus now I have the necessary test gear I can take a look at PCBS if anybody is interested.

As this will be done for both a hobby level plus used to help develop my testers more, I will not be charging ridiculous rates as I would like to use this to help the arcade community and ultimately preserve these facinating and collectable games/machines.

The way I will work this is that all I ask is you pay for postage both ways plus any parts that are used. Any parts I change that dont help with the repairs I will not charge. On top of that I will charge a nominal fee of £20 per hour which I hope is fair. If I cant fix the board or decide it not viable I will not charge. Full repair details will be sent so you will be kept in touch of the progress at all times.

My repairs are professional and usually I aim for 'invisable' repairs so the boards are in as good a state as they arrive. Just like my own.

I am based in the UK and typically prefer boards that are pre jamma but open to offers.

Drop me a pm if anybody is interested.

Thanks

Mark
 

andrewsm

Active member
Feedback
1 (100%)
Credits
485CR
Thanks. Ok im in the wilds of Scotland but then its only a post away. Its a sort of way for me to gain more experience with different boards which will enable me to give the tester more capabilities hopefully. I picked those figures as I felt were fair but im open to offers as long as Im not out of pocket for it, We are all here to help one another so this and my tester are my contributions
smiley1.gif
smiley1.gif
 
Top