Pengo PCB problem?

Lupin

Newbie
vacBacker
Feedback
1 (100%)
Credits
25CR
Finally had some time to play my Jamma cabinet.

Switch on Pengo PCB with jamma adapter and get beeping sound.

So turn off check connectors and power, turn on and now get screen below white with odd coloured blocks (Sorry picture looks pink).

Any suggestions to correct problem?

PengoDisplay.jpg
 

Lupin

Newbie
vacBacker
Feedback
1 (100%)
Credits
25CR
Voltage unchanged and other Jamma games working ok.

Reseated all eproms. Result is different patten on display when turned on.

I assume eproms?

PengoDisplay2.jpg


Lupin2022-02-06 17:10:11
 

Lurch666

Active member
Feedback
21 (100%)
Credits
4,517CR
These old games can be sensitive to voltage.

One game might only work at 4.7V and another at 5.3V.

Check the voltage on the PCB and if no change I would replace CPU if you have a spare then check CPU eproms against mame. The CPU eproms are the group of eight.
 

Lupin

Newbie
vacBacker
Feedback
1 (100%)
Credits
25CR
Thanks again.

Did checked voltage V5.3.

So assume will be PCB and I do not have spare parts.

Was checking game to sell anyway.

So sadly now will have to sell as needs repair :(
 
Top