Pi Naomi NetBoot

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Can I have a little help here please?

I have a Pi model B for Naomi net boot which works fine. I have now picked up another pi today the same which I am trying to NetBoot to my other Naomi unit via new cables and it's own Naomi 2 and dim. Problem is I have taken an image of the original sd card onto my computer and it copied fine, then saved it onto another sd card same size but it won't boot or do anything. I have tried to format the sd card from the PC in case it had faulty sectors. LL files have been transferred the same and are exactly the same file size.

Am I missing something? I know he Pi works as I have tried original sd card. Both 32g and have copied every folder over like for like but still nothing. It's driving me mad!!

Thanks,
Steve
 

corn

Active member
Feedback
26 (100%)
Credits
231CR
What software did you use to take the image of the original card?

Also, what netboot image are you using (there are a few)? I personally just use this as I only tend to boot one game so have no need for an LCD. This one boots nice and quickly:

http://www.e-venturi.com/jamma/?page_id=1073

Games go on a USB stick with this release - nice and easy to swap if you really need to.

You might be better off getting hold of the original image, writing that to SD and then transferring your games over again (as opposed to copying your existing card).
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
The image I have is what came with the pi set and has been working ok. It has all the Naomi games available on it. I have one in my Naomi cab and I want to use the other on my crazy taxi machine with all the driving games.

I don't understand why it won't work as I have taken a complete copy of what's on the original sd card and just copied it to another card. My knowledge of pc's and pi is very basic. Could there be a reason why the copied image won't work? I have tried it 3 times with no luck.

Thanks
Steve
 

corn

Active member
Feedback
26 (100%)
Credits
231CR
You'll probably need to take a full disk image that copies the card block for block. The card has a boot partition (and maybe some others) that might not be getting copied correctly. The pi does very little if it can't find the boot partition and the correct files to boot from. I suspect this is your issue.

If you are using windows, I'm sure someone here will be able to suggest some decent software that reliably takes card images and can be used to copy them to new cards.

Personally, I've never actually copied an SD card and tried to restore it to a new card. I've always started from scratch with a new image.
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Sounds like you could have hit the nail on the head. I am using windows 10 on the wife's computer to take a complete copy. Like you say I guess it's not copying it perfectly.
 

obcd

Active member
Credits
3,830CR
You need a "disk imaging" program that makes an exact copy of the sd card sector based. You will need to run the program as administrator since W10 doesn't allow access to the card at such a low level as normal user. After the copy process, windows should see the boot partition and give it a drive letter. (You might need to remove and reinsert the sd card for that) There is also at least a second ext4 partition that windows can't see.
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
After spending nearly 6 hours on this still no joy. Downloaded win32 disc imager and followed all the instruction for copying and install. All I get is the red led on pi and a quick flash of green then nothing. Tried it twice but still the same.

Why is this stuff so complicated to do. Starting to get very frustrated with all this stuff now it's beginning to make me want to get back to playing squash at my local club and take a break from all this arcade stuff.

It's supposed to be fun.
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
It should be fairly straightforward to copy a working SD card. You would need to use Win32 Disk Imager, select the drive letter which is the SD card, select a name for the image file, and then hit read.

Once data is read you will have generated an image file

Pop the blank SD card in the reader with the same drive letter, select the disk image you've just taken and then hit write

I've done this many times with Pi SD cards and never had an issue

Have you checked the working SD card on the Pi which isn't booting? Does it boot?
Purity2016-10-30 16:09:08
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
I have done exactly what you mention but still nothing. Have tried original sd card on both pi and it works. This copy card tries to boot with red led then green flashes three times then nothing. Plenty of space on the sd card so I guess it could be a faulty card. It was purchased brand new should be ok. I do t want to buy another only to find the same problem.

Why can't things be simple to do??????
 

corn

Active member
Feedback
26 (100%)
Credits
231CR
Have you tried plugging an HDMI cable in to a TV to see if it actually tries to boot?

Might be worth trying the image I linked to above to see if that writes ok. If that boots, at least you know the card is ok.
 

obcd

Active member
Credits
3,830CR
His original sd card works on both pi's....

So, either the cloning of the card goes wrong or the card isn't compatible with the raspberry pi.

After the cloning, does the boot partition becomes visible in windows? If that's the case, the cloning probably succeeded. To make sure, you can create an image file from that card and compare it with the image from the original card. If both are identical, it's likely an incompatible card. After so many hours of fustration, I would simply buy another sd card and try with that. You can find a list on the internet with compatible tested cards. Problem is that some chinese clone cards look identical to original ones but sometimes are crap. So, your Kingston or Sandisk could in fact be something totally different.
 

smarty

Ready Player One
vacBacker
Feedback
12 (100%)
Credits
1,305CR
I'm messing with Pi's at the moment. There is a built in SDcard copy software built into the Raspian build i'm running, its specifically for cloning/backing up cards.

If you get an USB-SD card ready that works you should be able to do it. If your Pi SD cards can't be made to run a desktop environment I'm sure you could use 2x SD card reader's and boot the PI with an image then copy from one reader to the other.
 

bbz149

Active member
vacBacker
Feedback
26 (100%)
Credits
1,608CR
I can do a guide of how to create a working card with links to the relevant Software. Can't do it till I get home as currently in Spain on a Mobile Phone and Tablet.
 
Top