Hi guys,
I have a UMK3 PCB which is faulty. The PLCC socket at U45 is affected by corrosion and the pins in the socket are heavily oxidised. I've attacked them with a fibre glass pen but to no avail. When I push down and manipulate the chip with heavy pressure. I get a response from the board, but it's still not enough to initiate a boot.
It did boot yesterday for the very first time but didn't get beyond the test screen. Today, it's black screen day again.
Is there any process that can remove this socket - hot air works for example? I'm happy to have this one fixed if possible, would be nice to have this working. The socket appears to be the stumbling block and is surface mounted on the PCB, and there's no way I can do that repair.
I have a UMK3 PCB which is faulty. The PLCC socket at U45 is affected by corrosion and the pins in the socket are heavily oxidised. I've attacked them with a fibre glass pen but to no avail. When I push down and manipulate the chip with heavy pressure. I get a response from the board, but it's still not enough to initiate a boot.
It did boot yesterday for the very first time but didn't get beyond the test screen. Today, it's black screen day again.
Is there any process that can remove this socket - hot air works for example? I'm happy to have this one fixed if possible, would be nice to have this working. The socket appears to be the stumbling block and is surface mounted on the PCB, and there's no way I can do that repair.