Programming (burning) an EPROM

alfa75

Active member
Feedback
19 (100%)
Credits
96CR
Hi all

I'm searching for an EPROM burner, especially for arcade devices. It requires several or most devices can be burned with a certain eprom burner? Very
specifically I search for a burner with which I can burn the eproms of
my captain commando (capcom), since there the battery was empty.

I know there are so many threads about this theme, but the most are so old and I'm not sure which one I should choose.

Thanks for help!
 

mappy24

User
Credits
43CR
Check first which chips you need to program and then buy a programmer that has that chip on it's compatibility list. I got the MiniPro mentioned above and managed to do EPROMs for 1942 and Mr Do.

Someone correct me if I'm wrong, but I'm sure I managed to program a chip that wasn't on the compatibility list but had the exact same specifications of one that was.

Edit: incorrect info
smiley17.gif


mappy242017-05-20 12:22:43
 

obcd

Active member
Credits
3,830CR
Sometimes the 25V VPP devices are a problem as some programmers only support up to 21V.

An usb port can deliver 5V 0.5A, and this might indeed not be enough to program a device.

The programmers use a step up voltage converter to create the necessairy program voltage, so it's not like they are limited to 5V.

It's the maximum current output that is the limiting factor.
 
Top