PSU swap over wiring differences

Adamski

Active member
Feedback
7 (100%)
Credits
401CR
Hi All
So upgraded my crappy Megatech PSU for a Suzo Happ and thought I would be OK just swapping the terminals over like for like but I'm not.There are differences on the Suzo Happ that make me unsure.Could some kind soul tell me what ones match from the pics please?
 

Attachments

  • 20240804_173324.jpg
    20240804_173324.jpg
    56.7 KB · Views: 33
  • 20240804_173312.jpg
    20240804_173312.jpg
    66 KB · Views: 36

Ace`

PlanB contributor #1
Feedback
40 (100%)
Credits
4,032CR
Do one wire at a time and make a note of what the label was on the original power supply.

AC/N is mains netrual should be blue
AC/L is mains live and should be brown
FG or the Earth symbol on the new one, which should be green and yellow

Then it's just a case of connecting ground to ground, +5v to +5v and +12v to +12v. -5v isn't used.

The old one had two +5v connections so you need to combine them and connect them both to the single +5v on the new one.
 

Adamski

Active member
Feedback
7 (100%)
Credits
401CR
So looking at my old one there are 2 5v.
One white wire and one yellow wire.The bridge comes from one 5v and goes to earth.As I only have 1 5v Ace kindly gave me directions and said to combine the 5v.This is why I bridged it to mirror the old one as much as I could.So is this OK?
Why the bridge in the first place as well?

20240804_172053.jpg
 

Ace`

PlanB contributor #1
Feedback
40 (100%)
Credits
4,032CR
That's a better picture and makes more sense now, don't connect yellow and white. Yellow is +5v and White is ground and has been connected to earth which is something people do for some reason (to help with noise issues?) but I don't think is necessary, leave it off on the new one.

I am interested to know where the violet wire goes as -12v shouldn't be used.
 

Ace`

PlanB contributor #1
Feedback
40 (100%)
Credits
4,032CR
So in short remove the green / yellow bridge wire, move white down to ground and remove violet completely as you've currently got it connected to ground and it was -12v originally.

See if you can see where the violet wire goes, I have a feeling it was connected incorrectly originally.
 
Top