[ukvac] Q regarding Gauntlet->Jamma conversion
Hi all,
A while back I tried to convert a Gauntlet board to jamma using some pinouts
I got off wiretap. I hooked up the video, gnd and +5v only: just as a test.
All I got was a black screen. There was definitely some kind of video signal
coming from the pcb and the power LED was lit. The question is: what went
wrong?? Is the board dead OR am I missing something (I dont have the
audio/reg board). Any help on resurrecting this project will be much
appreciated......
Email: karld@foola.u-net.com
------------------------------------------------------------------------
<center>
<a target="egnewwin" href=""http://clickhere.egroups.com/click/394">
<img width="468" height="60" border="0"
src=""http://clickhere.egroups.com/img/000394/spears2.gif"
alt="click here"><br>
Click Here!
</a>
</center>
eGroups.com home: http://www.egroups.com/group/ukvac
http://www.egroups.com - Simplifying group communications
Hi all,
A while back I tried to convert a Gauntlet board to jamma using some pinouts
I got off wiretap. I hooked up the video, gnd and +5v only: just as a test.
All I got was a black screen. There was definitely some kind of video signal
coming from the pcb and the power LED was lit. The question is: what went
wrong?? Is the board dead OR am I missing something (I dont have the
audio/reg board). Any help on resurrecting this project will be much
appreciated......
Email: karld@foola.u-net.com
------------------------------------------------------------------------
<center>
<a target="egnewwin" href=""http://clickhere.egroups.com/click/394">
<img width="468" height="60" border="0"
src=""http://clickhere.egroups.com/img/000394/spears2.gif"
alt="click here"><br>
Click Here!
</a>
</center>
eGroups.com home: http://www.egroups.com/group/ukvac
http://www.egroups.com - Simplifying group communications