r-type fault

sukhbir

Active member
Feedback
46 (100%)
Credits
1,735CR
hi all! i have a major title 1 pcb converted to r-type 1 which i have owned for two years and has not given me any trouble until the other day i powered on and i noticed the bottom section of screen has been lost which normally shows the score and beam power.any suggestions where the fault may lie.
IMGP0098.JPG
 

Flinnster

The Dino King
vacBacker
Feedback
29 (100%)
Credits
2,566CR
tb2000 said:
Any Fujitsu brand logic chips on the PCB?

My board (may not be the same as the OP's) is all Nanao, Toshiba, NEC, & Texas Instruments ics. I can't see a single Fujitsu on it.

I had another thought too - check the seating on your daughter board, and the two connectors between the A+B boards.
 
Top