Reading 9332A ROMs (Gorf)

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Am I missing something here? Fixed my Gorf this afternoon (was a bad program RAM) but since mine is not the same as any of the versions I've seen in Mame I thought I'd dump it. My ROM board has 9332A masked ROMs which I understood to be 2532 compatible.

I thought I confirmed this because I burnt a test ROM to a 2532 and dropped that straight into socket X1 and it worked fine, yet when I read 9332A's with the device set as 2532A in my programmer they just read as blank when I know they're not.

So what gives?

I'm struggling to find pinout for 9332A because all the results just come back as 2532.
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Cool. Swap pins 18 & 21 and read as 2732. Thanks.

I saw that page earlier which is how come I arrived at the conclusion I should be able to use 2532 in place of 9332A but I didn't follow the link in the thread which ultimately contains the info about swapping the pins to read them.

smiley20.gif
 
Top