Recommendation for a ROM programmer?

gridrunner

Ex-lurker!
Feedback
3 (100%)
Credits
206CR
Hi everyone,

I'd like to burn a new set of ROMS for a commodore PET and this got me thinking how useful it would be to have a good all round ROM/EEPROM programmer. There seems to be quite a lot of options out there, but ideally I'd like something that is:

Low cost

USB

Windows 7 friendly

Can burn a range of roms for older computers and gaming gear

Does anyone have any good suggestions for an entry level product?

thanks

stu
 

grobda

"Look at the size of that thing!"
vacBacker
Feedback
7 (100%)
Credits
1,061CR
btw it doesnt do 2708s, and ive not had much success with 2716s in it either, but it burns 2732s (and bigger) fine.

i dont know the entry level for something that does everything, or if such a thing even exists.
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
I don't think an 'entry level' exists for something that does everything. My Dataman 48Pro+ does everything, except it is a bit fussy about some of the makes of bipolar proms that it will program. But at £900 (give or take) for the unit, 2708 adapter and PSU upgrade (for the bipolar proms) you can hardly call it entry level
smiley36.gif
 

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
Agreeing with grobda here - low cost and wide range of ROMs are mutually exclusive unfortunately.

The VP-280 has known issues with stuff as large as 2764 but I understand some people have seen improvements recently. Definitely worth waiting for some more owners to chip in.

Is the requirement for old stuff going to be frequent? If not I'd suggest something from the Wellon range and then outsourcing your really old stuff as and when needed. The 280 is a nice progger indeed, plus it has some other cool functions.
 

cliff_poole

Active member
vacBacker
Feedback
6 (100%)
Credits
1,069CR
As others have said, if you need to program any of the more obscure old stuff, you'll need an old programmer. Problem is, none of these will tick your first three boxes.

I have seen a couple of Data IO programmers on ebay recently, would handle just about any old EPROM or even bi-polar PROMs but you'd have to have an old PC running DOS to be able to use them.

It is only 2764s that I have had problems with on the VP-280, it just doesn't want to read them consistantly, returns a different checksum each time. I'm sure it is just a software issue.
 

grobda

"Look at the size of that thing!"
vacBacker
Feedback
7 (100%)
Credits
1,061CR
right enough the time pilot i repaired had 2764 roms that read bad. thought it was the roms being dodgy; i replaced them with 256s due to availability. it seems ok with 2732s ive done quite a few while fannying around with galaxian hacks.
 

Ordyne

Active member
vacBacker
Feedback
5 (100%)
Credits
1,282CR
Id go for anything xeltek but they aren't cheap and watch out for chinese copies. I had a 48 programmer, I used to like Dataman stuff untill they stopped making their own kit, maybe the software updated and was better as when I had mine it wasn't the best and mega slow with 32bit roms.
 
Top