Replacing glass capacitors

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
A glass 0.1 25v ceramic capacitor lit up for me tonight and obviously needs changing. These seem to be pretty rare to replace in this form. Would I be ok changing this for a 0.1uf 25v (104) ceramic disc capacitor? I'm sure it would be ok?
Purity2017-05-15 23:08:47
 

andrewsm

Active member
Feedback
1 (100%)
Credits
485CR
Hi Ben,

The glass ones are encapsulated for tolerance and also manufacturing as they can be submerged in arklone which was the cleaning method years ago before health and safety forced a water based flux etc. They were also used by AI (auto insertion) machines and came in a reel. Standard 104 or .1uF caps will be fine as they are prob just decoupling.
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
Never seen that happen before. The glass capacitor gave a nice glow, before i powered off the board. I can't see any short around it, so I can only assume it was on its way out. I will replace with a disc capacitor and monitor it for smoke when i power it up
Purity2017-05-16 00:11:51
 
Top