Robotron Rom Error

korruptor

Bow down to SUPERION, mortals!
Credits
2CR
Hiya,

I'm a bit lost at how to diagnose an issue with our Robotron cab. :(

On boot, the rug pattern appears, then the machine shows "ROM ERROR 7", before finally booting.

I've opened up the machine and reseated all the cables, then noticed that the LED on the ROM board shows:

"2 0 L"

while the rug pattern's on, during boot.

Currently the game plays, but randomly crashes.

I'm a total noob at this stuff, so can anyone give me a few pointers?

Much appreciated :D

G
 

P-Man

International man of mystery
Feedback
4 (100%)
Credits
1,273CR
get the manual, the onscreen readout and the rom board indicators will tell you which rom the game pcb thinks is causing you issues. Replace what it indicated first then go from there.
 

chadsarcade

Lord of Vectors (tm)
Feedback
11 (100%)
Credits
443CR
You're reading the 7-segment display upside down, the "L" is a 7. As per the screen, it's also reporting an error with Rom 7. Try reseating that ROM as a starting point.
 

DanP

Administrator
Staff member
vacBacker
Feedback
5 (100%)
Credits
2,232CR
Sounds like you only need one replacement eprom. You need to identify what type of eproms you need for your board obviously. It will be something like a 2516/2716 or a 2532/2732.

Dan
 

korruptor

Bow down to SUPERION, mortals!
Credits
2CR
I had a quick look at work as I thought I might be able to burn my own from the mame roms. I've never done it before so figured it'd be useful to get a burner...

I'll need to look at the chips tomorrow to see what type. I'm guessing if I peel the stickers off it'll say on the chips?korruptor2012-02-28 19:20:08
 
Top