Rom Burner

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
Nes4life said:
Just ordered a GQ-4X from Amazon for £69 delivered and an eraser for £14 delivered. I needed the 2716 capabilities but can't wait for a deal to come up. https://www.amazon.co.uk/dp/B00HS6EWFS/ref=cm_sw_r_sms_awd_x_hRraybR5SRPKY

Eeprom programmers seem to pop up as a common wanted request. This isn't a bad thread if you can find it
smiley1.gif

from what i remeber my 4x cant do 2716

also remeber that a 2716 in general is a 25V VPP

and a TMI2716 is a Tripe Rail with VPP at -5V
 

Shinydaz

Active member
vacBacker
Feedback
6 (100%)
Credits
814CR
I've read you need an external power supply for the 25v on the gq4x and you need to pick from 12.5v, 21v or 25v on the device list. Im also looking for a burner which will do 2716.
 

RSwanson

User
Feedback
1 (100%)
Credits
205CR
2716=25v, 2716A=21v, 2716B=12.75v
2708 and TMS2716 not only use 3 rail voltages, but use a completely different programming algorithm, where the VPP 25v is pulsed, instead of the usual TTL pulse, hence why no modern programmers do them.

USB powered programmers that state they do 25v VPP programming probably aren't particularly reliable with some chips, as some chips require a max of 50mA @ 25v. So even with a reasonably efficient power management IC from 5v->25v, you've used up half of the absolute MAX 2.5w USB power, and that's not including what's required for the other circuitry and VCC 5v.
RSwanson2016-10-15 06:29:44
 

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
philmurr said:
My GQ-4X does 2716's just fine. Haven't needed an external PSU for any of them.

I'm with Phil on the GQ-4X - seems to work fine with 2716 (normal in the field ones)

One thing I did note, was that the Mini-Pro it kept having problems reading, then verifying Intel 2716s from a Space Invaders I was testing

Turns out you can up the VCC voltage to 6.25 volts which gave me much more consistent verification readings
smiley4.gif


Handy tip!

Screen_Shot_2016-10-14_at_22.59.25.png
 
Top