ROM Sig Challenge

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
OK, to the best of my knowledge, the Fluke 9010 signature calculation routine is known (for sure), but the 9100 one is not.

What are the chances given as many signatures from known good ROMs as people could provided of someone putting the same sort of effort that is put into cracking encryption, in order to work it out?

Is that even remotely possible?? I have no idea.

Would be nice if it could be worked out though, then a CRC32 to Fluke 9100 program could be written.
 

porchy

Active member
Feedback
5 (100%)
Credits
994CR
The 9010 signature is fine for the 8 bit pods but the 16 bit pods like the 68000 do not work with the current utility available.
The 9100 is different again but I think I may be able to help you out in some capacity with both of these problems if needed.

Let me check what I've got and will PM you
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
From a purely selfish point of view, I'm not worried about the 9010 sigs
smiley36.gif


To be fair, I didn't know the 16 bit pods were any different, and have to question how many people are actually likely to be using them on their 9010's?

I don't know if the same can be done on the 9010, but on the 9100 I have a script that calculates the CRC32. It's not the fastest thing in the world (and I have the FT 9100), and it's not the most convenient thing to do either as I have to copy / modify the script for each UUT but at the end of the day it does the job and of course as soon as I know the CRC32 matches, I can then get the 9100 to tell me the fluke sig.

But that's why I say that a 9100 sig routine would be really rather handy!
 

cmjones01

Newbie
Credits
194CR
Maybe quicker, though still laborious, would be to program ROMs with known patterns: all zeroes, all zeroes apart from one bit, and so on, which might make it easier to work out the algorithm.

I have neither a 9010 nor a 9100 so I'm automatically exempted from actually having to do this
smiley1.gif


Chris

cmjones012015-02-12 17:07:54
 

P-Man

International man of mystery
Feedback
4 (100%)
Credits
1,273CR
The 9100 signature has been cracked an a paper written about it... the guy hasn't made it public yet.

The 9100 CRC32 routine i gave you gudd is not a script, you can call it from other TL1 programs if you set it up properly :)

Since getting my 9100FT the CRC32 routine is super quick compared to the 9100A, you should be greatful of the improved accuracy it provides! :)
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
I'll have a look later. I don't remember how I've got it set up.

Brute forcing it is not as ridiculous as it sounds. Just because it's a ROM sig, doesn't mean you can't do it on a RAM
smiley2.gif
 

ColinD

Active member
Feedback
6 (86%)
Credits
1,367CR
Off topic.... but I WOULD be interested in Fluke 9010A / 68000 pod checksums... I've not got my head around how the 68000 addresses / data bus works yet.... You would think that it would give you checksums from a working board ? - If I can? auto generate checksums then I've completely missed that one.....
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Yeah, of course...

The ROM sig function on the keyboard of the fluke will always give you the signature that it calculates from the memory range you tell it. So if you know your ROMs are good then you have your signature. Or did I miss what you mean??
 
Top