Rtuned 1st test power

[Retroman839]

Just posted this in pinball section 🙃😣

Checking power …

2 fuses in the 100v distribution board are ok ..

fuse at the back on the power in is ok

But looks like I’m only getting 02.9v

From the 100v distribution pcb ?
?
Pink live / blue neutral ?
Unless I’m measuring the neutral ?

 

[big10p]

Try it with a load.

 

[big10p]

Wait a minute. Where have you got the other probe?

 

[Retroman839]

Try it with a load.

Load you mean plug all or half of the
Connectors back into the distribution
Outputs ?

I have observed the led on the i/o
When the 100v out puts are back in

 

[Retroman839]

Wait a minute. Where have you got the other probe?

On the transformer outer case

Will get back at it tomo …

Taking time don’t want to do anything rash

 

[big10p]

You have your meter set on VAC. Is this what it outputs?

 

[Bods]

You have your meter set on VAC. Is this what it outputs?

If it's the 100v for lights etc yeah

You need the other on output from Transformer, you should have 100v going into that if it's just distribution board so check that, you'll have same coming out if it's just connectors

 

[Retroman839]

Cheers bods / big 10p
I’m always confused metering the transformer ..

But am I ok just with probe live & probe ground In any way round on the transformer secondary connector that’s going into the distribution board ?

 

[Retroman839]

Just noticed as well on the lable

So could this transformer be a 250v to 250 v isolation ? Uk type ?

 

[Retroman839]

So far so good
😊



looking good

Now to sort pc
And connect

 

[Retroman839]

Good Manual
Clear wiring diagram

https://segaretro.org/images/0/0a/SegaRaceTV_Lindbergh_UK_Manual_Twin.pdf