Scud race pcb error leds

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
I jave just powered up an unknown condition scud race pcb stack.
No picture on the screen and I get red LEDs 14,13,12 flashing and nothing else.

What code is this trying to tell me and the possible fault please?

Tried looking on google but couldn't find any info.

Thanks
Steve
 

Outrun2

Colonel Outrun
Feedback
5 (100%)
Credits
1,182CR
Are you sure the power supply is ok? Those old Model 3 PSUs are not overly reliable and while the cab will fire up, sometimes the game won't boot - I've had black screen on boot up two out of three times, then it will work fine for 20 or 30 times in a row.

I don't know what all the LEDs indicate but if it was me I'd be checking the PSU voltages, ensuring the PCB stack and filter board is properly pressed together and maybe trying a different Step 1.5 ROM board to make sure that isn't a fault.
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
I have spare boards I can try just wanted to get an idea before I split the stack. I also have a psu in another cab I can try. The cab does boot up another faulty stack I have with video board faults so pretty sure the cab is ok.

I will check out again this week and report back.

Cheers
 
Top