Sega Outrunners PCB graphics problem

lowlevel

User
Credits
69CR
On my recently purchased Outrunners (has been in storage by someone for 2 years, stored working)

I have an issue on the left side that comes up after +- 15 to 20 minutes. Shutting it down, letting it cool of for the same amount of time fixes the issue.

This is only present on the left player. All rams test good during this.

Any clues what this could be? (see pictures)
13022435_10210174526665834_815618641_n.jpg
13020093_10210174525505805_2102695132_n.jpg
13020371_10210174524985792_290737408_n.jpg


lowlevel2016-04-18 09:42:53
 

obcd

Active member
Credits
3,830CR
Maybe you could try a tube of freeze spray and see if cooling down some of the chips (or areas of the pcb) fixes the problem. You might be able to narrow down the issue like that. (I must admit I never was able to fix anything using that method, but your problem seems like an ideal candidate for such a fault finding method.)
 

lowlevel

User
Credits
69CR
I 'solved' it by replacing the pcb..

Still have a few todo's on my todo list regarding this machine:

1)

checkpoint leader lamps constant on state due to bad ssr board (other topic gave me a replacement part)

2)

right steering wheel motor running causes interferance in left monitor and makes the data disappear on the mini displays

(comes back after a few moments or end of race). Left motor doesn't cause any problems
 

obcd

Active member
Credits
3,830CR
I assume you can exchange the steering FFB drive motor between left and right unit to see if that moves the problem as well. I would also check the wiring for unconnected ground wires that could be a cause of interference. If left and right use separate motor drive boards, you could try exchanging those as well.
 
Top