I'm working on my twin sega driving cabs with PC's fitted for multi driving game/sim setup
The Subwoofers in the seat aren't great and most now seem to have suffered from foam rotting so would be to be re foamed anyway. the audio system I fitted in them are Dell 5.1 PC setups I got one from the tip initially so bought 2nd cheap, the Subwoofer box which has quite a weight to it are fitted in the machine base, the sub speaker was dual coil so I took off one set and wired to the in seat subwoofer which just ruins it to be honest as you can't crank the bass up, guessing the foam is shot now too so even worse and with unplugged the bass cranked up full gives the small front and gullbox speakers that much needed full range sound, so I was thinking instead of seat subwoofer it's time to change them to Bass Shaker fitted to bottom of seat so you get the feel of engine revs etc but question is what SIZE would give enough but not over top to point it's annoying
The Subwoofers in the seat aren't great and most now seem to have suffered from foam rotting so would be to be re foamed anyway. the audio system I fitted in them are Dell 5.1 PC setups I got one from the tip initially so bought 2nd cheap, the Subwoofer box which has quite a weight to it are fitted in the machine base, the sub speaker was dual coil so I took off one set and wired to the in seat subwoofer which just ruins it to be honest as you can't crank the bass up, guessing the foam is shot now too so even worse and with unplugged the bass cranked up full gives the small front and gullbox speakers that much needed full range sound, so I was thinking instead of seat subwoofer it's time to change them to Bass Shaker fitted to bottom of seat so you get the feel of engine revs etc but question is what SIZE would give enough but not over top to point it's annoying
been so busy working on the machines i'd forgot to keep looking
