Sega Transformer Help

Chopper79

Active member
Feedback
8 (100%)
Credits
668CR
This transformer is from a 240v UK sega thunder blade cab. It's not marked which side is the input? Their are brown and blue wires both sides, which doesn't help at all. Would anyone know which side is the 240v input side?

20220119_172841.jpg
 

bones

Active member
Feedback
15 (100%)
Credits
1,628CR
I can only take a guess that the 3 thicker wires brown,blue and yellow are the 240v input(may be 110v-120v) The 2 thinner wires brown and blue on the other side could be 110-120v perhaps for a monitor and as there are other wires that side as well it suggests it's the output side. But not gospel, I'd see if there's a manual for it that'll probably have the information in it just to be sure
 

Chopper79

Active member
Feedback
8 (100%)
Credits
668CR
bones said:
I can only take a guess that the 3 thicker wires brown,blue and yellow are the 240v input(may be 110v-120v) The 2 thinner wires brown and blue on the other side could be 110-120v perhaps for a monitor and as there are other wires that side as well it suggests it's the output side. But not gospel, I'd see if there's a manual for it that'll probably have the information in it just to be sure

The 120v output was for a K7000 19" Monitor.
 

bones

Active member
Feedback
15 (100%)
Credits
1,628CR
In which case I'd think the 3 wires on their own would be the 240v input side. You could connect that up without connecting up any of the other wires to be on the safe side and pop a multimeter on AC voltage and see what voltage is coming out of the other brown and blue. If it's 120vAC then you know it's right, I think if it's the wrong way round it'll step the voltage up to 480vAC so have a look. I couldn't find a manual online to refer to so hopefully someone else can be more specific.
 
Top