been handed a Taito 3 board SI part 2 to test.
1st problem is the owner has taken the roms out, with no record of how to put them back.
The roms are labelled UV1-UV10. 1-4 are 2708s, 5-10 are proms.
The PCB is labelled PVN00002;
any ideas?
1st problem is the owner has taken the roms out, with no record of how to put them back.
The roms are labelled UV1-UV10. 1-4 are 2708s, 5-10 are proms.
The PCB is labelled PVN00002;
any ideas?
