Simple EPROM Programmer

sapporo46

User
Feedback
2 (100%)
Credits
70CR
Hi,

I'm a relative noob at this and not particularly skilled, so bear with me...
smiley5.gif


I have bootlegs of the first 2 Double Dragon games and I think one or more ROMs are corrupt on my DD2 board - I did have to resolder some caps and fit a new volume pot on it to get the sound working as it wasn't in very good condition.

I've had all the ROMs out and cleaned the pins but I still have sprite corruption on the screen in some animation frames.

The ROMs are 27512 chips, can any of you guys recommend a not-too-expensive EPROM programmer I could use to verify the ROMs? Would something like this, or this be OK?

Thanks in advance for any help

IMG_20150517_092558.jpg
 

abaxas

Active member
Credits
124CR
Dave Jones review

https://www.youtube.com/watch?v=FLG03f_ua5g

EEVblog forum thread.

http://www.eevblog.com/forum/blog/eevblog-411-minipro-tl866-universal-programmer-review/

Don't use the software than comes in the box, download the upgraded version as it supports many more devices.
 

abaxas

Active member
Credits
124CR
23 quid delivered aliexpress

http://www.aliexpress.com/item/Free-shipping2013-October-Updated-MiniPro-TL866cs-True-USB-Willem-TL866-Programmer-Updated-from-EZP2010/1965454016.html
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
pay a little extra and buy from UK

aliexpress after care is sh*t and if it breaks your on your own

I paid £50 for mien with uk warranty and ebay protection

i have experienced faulty goods arriving from aliexpress and always too expensive to send back and no buyer protection even though they say there is

when you experience it you will know trust me
 

Adrian Purser

Moderator
Staff member
vacBacker
Feedback
2 (100%)
Credits
213CR
I love the fact that the minipro has a TTL chip tester also.

If you get one then it's worth looking for one that comes with the extra adaptors for PLCC etc as they can usually be found for the same(ish) price.
 
Top