Sony Trinitron CRT LED blinking

jerryspaghetti

Active member
vacBacker
Feedback
37 (100%)
Credits
1,995CR
Merry New Year!!!!!!

Anyone come across the red light blinking 10 times on Trinitron?

Mine is doing it 10 times and I found a link to service manual saying ‘NVM no acknowledge’

UPDATE: I believe this is referring to Non Volatile Memory. So could this be an IC that's failed?

Anyone know what components need replacing?
 

Attachments

  • IMG_0132.jpeg
    IMG_0132.jpeg
    95.2 KB · Views: 12
Last edited:

jerryspaghetti

Active member
vacBacker
Feedback
37 (100%)
Credits
1,995CR
I checked the service manual but i'm not tech savvy enough to really get the root cause.

All I found is that the 10 led blinks means ‘NVM no acknowledge’ which I believe means 'Non Volatile Memory'

I guess my question is where is the IC that holds non volatile memory on these sets. I can swap it out if I can identify it.

Could also be a cold solder joint problem which is common with these.

Anyone used the oven method and what temp/time would you leave it in for ?
 
Top