Space Invaders Multigame

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
anyone have any gen on these as a fault finder?
my L-Shape pcb boots and runs,yet when i install the kit

it kinda beeps for 10 seconds and reboots

no test screen just garbage

been after one for ages then i snag one off fleabay and this happens

the braze site "fault finding " is under construction still

HEEEEEEELP
smiley36.gif
 

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
You sure its not the 8080 socket? Check the pins on the kit, they have nice habit of snapping. Just repaired one for Ben last Sunday.
 

mathj

Active member
Feedback
5 (100%)
Credits
499CR
I had one once that would call errors with the original cpu installed but the game worked fine without the kit installed, changed the cpu for a different one and it started working

math
 

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
well found the fault finder and it reported a bad ram
so i swapped locations and the beeps picked it again

i did this for a third time (luckily i have 3 socketed ram)

and it picked it yet again,so i need a Ram i rekon

game did play with lines and sometimes extra dots appeared Pman said it sounded like a ram fault

so im hoping the multigame has identified this as bad,as it does have diagnostics on board

sadly have none here 2104?

forcefulfil2013-12-17 22:12:46
 

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
Equites said:
Have you tried the SI test ROM to identify which RAM?

it bleeps a little like an atari test sequence

10 bleeps = ic k10 for example

it picked the same ram 3 times after being moved so im hoping it really is bad

it wont boot to test screen but bleeps still
 

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
forcefulfil said:
Equites said:
Have you tried the SI test ROM to identify which RAM?

it bleeps a little like an atari test sequence

10 bleeps = ic k10 for example

it picked the same ram 3 times after being moved so im hoping it really is bad

it wont boot to test screen but bleeps still

PM me your address and I will wing you a NOS RAM in the morning, 0.4" pitched buggers.
 

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
Massive thx to Nad for sending me a NOS Ram today!
smiley31.gif

Fitted it and the Multigame kicked into life

the onboard diagnostics seemed to be working well and correct!

we now have a Taito S.I. with a working multigame!

Cheers Nad,I owe you !

Phil
 
Top