space invaders

samusaran

Active member
Feedback
2 (100%)
Credits
273CR
ok so this is the noob question of the week.

ive got a taito SI and i want to get the bezel out and give it a clean,but cant seem to get it out.

how do you do it?

cheers Adi
 

RICHE100

Active member
Credits
36CR
hello ady dunno if a taito is ame as midway but what i did was reach up and through the coin door and unclipped the control panel then slid the bezel out

that was on my galaxian

i suppose you maybe be able todo it from the back also ?? just slide it out ??

someone will be along , but first method i know work allbe it on a galaxian
 

ataritoobin

Active member
Feedback
1 (100%)
Credits
199CR
If you open the back door of the cabinet, there should be a sliding retaining bar (can't remember if SI has two or not) on the inside top with a wingnut on it that pushes the bezel against the front of the cabinet to lock it in place.

Loosen the wingnut (but not all the way) and pull the bar back. You can then lift the bezel out the front of the cabinet via the lower metal "lip."
ataritoobin2012-03-07 20:33:14
 
Top