Star Wars problems..

Muerto

Administrator
Feedback
2 (100%)
Credits
157CR
Hello.

Long story short, in the final days before I moved back to Denmark from England
I purchased a Star Wars Cockpit.
Fast Forward - Got it "working" this summer, with a SW PCB I bought from a guy
on here, however, theres some Matrix errors I cant get rid of, I have replaced all the Vector RAM with new ones (old Toshibas on the PCB) but theres still errors
smiley19.gif

If I leave it in test mode, after 5 min or so, the errors disappear, but when I
switch back to Game mode, slowly but surely the vector lines gets more and more
messed up, switching back to TEST mode, and the Matrix errors is there again:
swmartixerror10.jpg


swmartixerror1.jpg


Is there something I can do, or is it only repairable by a skilled guy??

----*****----
2nd half of the story.
The PCB that came with the cockpit has the SW/ESB kit installed.
I dont know if its working because the monitor only shows a image 1/10 of a second and then gets shut down by the spot killer (I think), though it shows a picture!!
smiley11.gif
this happens every second. Heres a few images of the pcb, and if I remember correctly, there has to be a swicher connected to the PCB (I saw that on Andres SW at eurocade) and its not there.... Is it that who causes the spotkiller to go on, because it dont know which game should be run??
pmswesb1.jpg


pmswesb2.jpg


pmswesb3.jpg


Is there anythin I can do to make it work?? HELP...
smiley19.gif
smiley19.gif
smiley19.gif


Michael
 

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,653CR
Phil Morris is on here as VektorGlow - maybe he remembers the pcb if he keeps a log using the date on the sticker above?

He should know then which multi game kit it was that was used and possibly be able to help?

If he can't I would remove the multi game kit and re-test the pcb as an original.
 

Muerto

Administrator
Feedback
2 (100%)
Credits
157CR
Alpha1 said:
Phil Morris is on here as VektorGlow - maybe he remembers the pcb if he keeps a log using the date on the sticker above?

?

He should know then which multi game kit it was that was used and possibly be able to help?

?

If he can't I would remove the multi game kit and re-test the pcb as an original.

 

Thanks, if I could I would rather leave the multi kit on there as some (5-8?) wires are soldered directly to the rams...
 
Top