Street fighter 5 cab

[samusaran]

I use LB on all my builds, only use that now.

 

[ZedEx48K]

I use LB on all my builds, only use that now.

Me too, though I upgraded to BigBox for on cabs, LB on normal use PCs.

 

[samusaran]

Me too, though I upgraded to BigBox for on cabs, LB on normal use PCs.

Yes me too, well worth it for the money.

 

[monkeychunkuk]

I use LB on all my builds, only use that now.

With the premium?

For some reason I can get my joysticks to navigate around the menus ???

I use Xboxes to emulate the controllers as it’s easier in fighting games but that doesn’t seem to work on LB

 

[samusaran]

With the premium?

For some reason I can get my joysticks to navigate around the menus ???

I use Xboxes to emulate the controllers as it’s easier in fighting games but that doesn’t seem to work on LB

Yes mate, you have to go into options in LB and BB.you can map what you want to navigate both.

 

[monkeychunkuk]

Yes me too, well worth it for the money.

Agreed I picked it up today it’s fantastic

 

[samusaran]

Agreed I picked it up today it’s fantastic

I use Neon deluxe arcade in LB, and just started using Pyramid in BB. Give them a try and see what you think.

 

[monkeychunkuk]

Marquee support is great !!

Now do replace the main marques and integrate this monitor ? Or move it up and buy one of those DMDs?

 

[monkeychunkuk]

 

[monkeychunkuk]

I ordered a small DM and fitted a mock up holder for it I’ll bring the top marquee lower when I know it’s size

 

[monkeychunkuk]

The DMD screen came today. Im not sure how I feel now I fitted it

 

[neo-geo-mvs]

Looks great imo 🏆👍

 

[CMYKhazi-Dan]

The DMD screen came today. Im not sure how I feel now I fitted it

Maybe jazz up the bezel a bit that matches the yellow and white?

 

[monkeychunkuk]

Maybe jazz up the bezel a bit that matches the yellow and white?

Thanks that’s what I was thinking I may 3d print something in white to join the gap to the bottom

 

[monkeychunkuk]

maybe something like this

 

[ZedEx48K]

Honestly, making the screen central in it's bezel and some straight cuts would go a long way to making it better (no dig at your skills, but the ill fit draws the attention of your eyes), you can completely hide the screens bezel too, also get some mirror screws (they have cap heads, these somewhat match you screen bezel ones, https://www.mpmoran.co.uk/fastpak-value-pack-mirror-screw-flat-chrome-4pk-109117947 ), then just some silver lines like on the screen.

 

[monkeychunkuk]

Honestly, making the screen central in it's bezel and some straight cuts would go a long way to making it better (no dig at your skills, but the ill fit draws the attention of your eyes), you can completely hide the screens bezel too, also get some mirror screws (they have cap heads, these somewhat match you screen bezel ones, https://www.mpmoran.co.uk/fastpak-value-pack-mirror-screw-flat-chrome-4pk-109117947 ), then just some silver lines like on the screen.

Mate you so in my head,
Even with a steady hand getting that rectangle opening with a jig saw was a pain in the ass.
I’m tempted to get some corner trim to go Around it to hide the sins and maybe do the bottom in white.

 

[ZedEx48K]

with a jig saw

A straight line with a jigsaw is never gonna happen free hand, you could clamp a straight piece down to run a long, but a better cutting tool in the first place with pay off much better.

 

[monkeychunkuk]

A straight line with a jigsaw is never gonna happen free hand, you could clamp a straight piece down to run a long, but a better cutting tool in the first place with pay off much better.

Thanks zed I did use a clamp the first time but it wondered off

Thanks for the great advice I went for version 2 I did a little better I’m still gonna print a white corner bezzle to go around it

It’s not perfect, but thank you for the original feedback back I wasn’t happy with it.

I prefer the white it matches better My own question now do I have the marques flush to the top like that or do it the same distance from the bottom ?

Oh mirror screws on order good shout

 

[ZedEx48K]

Your visual problem is black and orange cab, white topper, no matter what you do to retain that topper you create a clash.