My Taito Space Invaders cab makes a loud humming sound from the speaker when it's on (and using the original power supply). The game works perfectly as do the sounds in the game.
I thought I'd narrowed the problem down to the original power supply (AA017741) by powering the board from a switching power supply and using an adapter in the cabinet. With the switching power supply there's no hum and the game works perfectly which is what led me to believe that the original power supply was the cause of the problem. I've completely rebuilt the original power supply using the component list here (thanks to Purity):
Taito_AA017741 (55 downloads)
The only components on the board I've not replaced from that list are the resistors.
Having rebuilt the supply however, I'm still getting the hum so I'm out of ideas! The voltages at the board measure as 5.03V, 12.41V, -5.2V and 15V for 18V input.
I think it's mains hum but I'm not sure why. I've uploaded a couple of videos so you can hear the problem.
Using the original power supply:
https://www.dropbox.com/sc/rbedwgvzqqxzl7y/AAAgqfnJr-3PPXp6tgaxQlDpa
Using the switching power supply:
https://www.dropbox.com/sc/sv6omka9tok6s53/AAA22y8AW7vlqA1ME0DRyBmXa
Anyone got any ideas?
Thanks,
Mike
I thought I'd narrowed the problem down to the original power supply (AA017741) by powering the board from a switching power supply and using an adapter in the cabinet. With the switching power supply there's no hum and the game works perfectly which is what led me to believe that the original power supply was the cause of the problem. I've completely rebuilt the original power supply using the component list here (thanks to Purity):
Taito_AA017741 (55 downloads)
The only components on the board I've not replaced from that list are the resistors.
Having rebuilt the supply however, I'm still getting the hum so I'm out of ideas! The voltages at the board measure as 5.03V, 12.41V, -5.2V and 15V for 18V input.
I think it's mains hum but I'm not sure why. I've uploaded a couple of videos so you can hear the problem.
Using the original power supply:
https://www.dropbox.com/sc/rbedwgvzqqxzl7y/AAAgqfnJr-3PPXp6tgaxQlDpa
Using the switching power supply:
https://www.dropbox.com/sc/sv6omka9tok6s53/AAA22y8AW7vlqA1ME0DRyBmXa
Anyone got any ideas?
Thanks,
Mike