RobWalmsley
User
- Credits
- 14CR
[ukvac] tech: bobble bobble trouble.
I have a non working bobble bobble board.
The roms of the cpu board were corrupt so I burnt a
new bobble bobble set, unfortunately that didn't fix
it.
Anyway bobble bobble doesn't have a 68705 mcu for
protection, but my board does.
So should it run the original roms, or should I remove
the 68705 and use the non-protected bobble roms?.
The board boots to a blank screen, there is cpu
activity and then it resets, presummably the watchdog.
Video section/board usually produce garbage until the
cpu section/board kicks in (from my experience) but
this game is completely blank; is this due to
protection, usual for bobble bobble or indicates a
much large problem?.
Thanks in advance
Rob
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
I have a non working bobble bobble board.
The roms of the cpu board were corrupt so I burnt a
new bobble bobble set, unfortunately that didn't fix
it.
Anyway bobble bobble doesn't have a 68705 mcu for
protection, but my board does.
So should it run the original roms, or should I remove
the 68705 and use the non-protected bobble roms?.
The board boots to a blank screen, there is cpu
activity and then it resets, presummably the watchdog.
Video section/board usually produce garbage until the
cpu section/board kicks in (from my experience) but
this game is completely blank; is this due to
protection, usual for bobble bobble or indicates a
much large problem?.
Thanks in advance
Rob
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
