TECH: Chase HQ JAMMA or NOT ?

JCRS

JCRS

Active member
Credits
114CR
[ukvac] TECH: Chase HQ JAMMA or NOT ?
Hi,

Ive just been given a couple of Taito Chase HQ PCB,s and want to clarify
that they are or arent JAMMA.

Ive looked at the edge connector looks and its looks JAMMA, klov says its
jamma.. but Sticky sez it aint :)

I know Chase HQ has a Steering Wheel so I dont expect the controls to work
if it is.

There is also a large (power) connector does anyone have the pinouts for
this

see the below pictures.

http://www.pinckney.org.uk/tech/MVC-001S.JPG
http://www.pinckney.org.uk/tech/MVC-002S.JPG
http://www.pinckney.org.uk/tech/MVC-003S.JPG

Cheeers

I also have some other pcbs available if ppl want to make offers b4 i stick
them on ebay.

T M N Turtles Original Konami
Tekken Original Namco
Final Lap 2 Original
Leathal Enforcers (now defunct) Original Konami
Arkanoid Bootleg
Space Firebird Bootleg
and 1 of the Chase HQ's if I can test them both
 
guddler

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
RE: [ukvac] TECH: Chase HQ JAMMA or NOT ?
Further to that last mail I just took a look.

This was scribbled on the first page of the doc, so it maybe worth
confirming it by going through the schematics properly, but...

?? = Not clear from PDF so check!

Gnd 1 A Gnd POWER VIDEO
Gnd 2 B Gnd ----- -----
?? 3 C +5 1 Gnd 1 VGnd
?? 4 D +5 2 Gnd 2 Red
-5 5 E -5 3 Gnd 3 Green
+12 6 F +12 4 Gnd 4 Blue
NC 7 H NC 5 +5 5 CSync
NC 8 J NC 6 +5
NC 9 K NC 7 +5
Spk+ 10 L Spk+
Spk- 11 M Spk-
+5 12 N +5
+5 13 P NC
?? 14 R Gnd
?? 15 S NC
Coin 16 T Coin
NC 17 U NC
NC 18 V NC
NC 19 W Start
Gear 20 X Accel
NC 21 Y NC
NC 22 Z NC
NC 23 a NC
Steer 0 24 b Steer 1
NC 25 c NC
NC 26 d NC
Gnd 27 e Gnd
Gnd 28 f Gnd

Guddler.
 
JCRS

JCRS

Active member
Credits
114CR
Re: [ukvac] TECH: Chase HQ JAMMA or NOT ?

I forget to look at spies for newer stuff.. (well in my mind newer stuff)

Time to get these suckers fired up.

Cheers.
 
You must log in or register to reply here.
Top