[tech] confused about ROMs

yorkshire_spam

Active member
vacBacker
Credits
765CR
[ukvac] [tech] confused about ROMs
This will come as no surprise to Andy after my blithering at him on IRC last night, but I'm confused.

The manual lists my PCB as having 4 4K*8 ROMS (32 kilo-bit by my reconing) which would mean 9332 or 2732 type roms

The PCB I have has 4 sockets and some (2, some missing I suspect) 9316 roms on it, which are IIRC 16kilobit.

eh?

Am I being stooopid (again) or what?
Has somebody been buggering about with this PCB before I got it and stuck the wrong roms in?
 

LukeWells

Active member
Credits
334CR
Re: [ukvac] [tech] confused about ROMs
4k*8 is yes 32kbit (2732etc) as you said

someone could have stuck some stilly roms in it

Luke
 

LukeWells

Active member
Credits
334CR
Re: [ukvac] Re: [tech] confused about ROMs
well maybe the manual was talking about the maximum specification of the
roms (i.e. up to 4x 4k*8) when in reality the game only uses 2x 2k*8

Luke
 
G

Guests

Guest
[ukvac] Re: [tech] confused about ROMs
How big are the equivalent roms in the mame "reference" set ?

Cheers,
Colin
 

yorkshire_spam

Active member
vacBacker
Credits
765CR
[ukvac] Re: [tech] confused about ROMs
The mame set are 6x 2K which ties up with the number of roms/empty
sockets I have on the PCB, but not what's in the manual.

I recon I'll go with the "reference" set and try my luck.

> How big are the equivalent roms in the mame "reference" set ?

>

> Cheers,

> Colin

>

>
 
Top