[Tech] Connectors - name them.

[LukeWells]

[ukvac] [Tech] Connectors - name them.
Hi,

Before I make a big order can someone in the know please confirm the
following for me.

Are the connectors used on :

gauntlet (for power)
namco super pac / mappy and dig dug (for power and video)

the connectors known as AMP mate and lock?

Also are the connectors that I need Male? (because the connectors on
the board apear to have female plastic but with male pins.

So do I need Male plastics with female pins or what ?

Thanks in advance

Luke

 

[guddler]

RE: [ukvac] [Tech] Connectors - name them.
Ampex Mate N Lok for definate. As far as the male / female bit goes I
believe you go by the pins not the housing so you would be looking for
female...

________________________

Guddler's Arcade
http://www.guddler.co.uk

>

 

[MarbleMad]

Re: [ukvac] [Tech] Connectors - name them.
>the connectors known as AMP mate and lock?
>
where are you going to order them from? I've been looking for these for
a while?
---
James G Watt
http://www.kinetic-arts.co.uk
Part of the Video Arcade Game Collectors WebRing.

You are in a maze of twisty little passages, all alike.

 

[guddler]

RE: [ukvac] [Tech] Connectors - name them.
Didn't we decide that RS still do them, but by a different manufacturer
and no longer listed under "Ampex Mate N Lok"??

I found some by doing the "gallery" list bit with all the pictures...

Not being awkward here I truly can't remember if we agreed they were the
ones or not!

Gudd.

________________________

Guddler's Arcade
http://www.guddler.co.uk

> >the connectors known as AMP mate and lock?
> >
> where are you going to order them from? I've been looking for
> these for a while?
> ---
> James G Watt
> http://www.kinetic-arts.co.uk

 

[MarbleMad]

Re: [ukvac] [Tech] Connectors - name them.
In article <001201c25d9f$2e9cb3c0$fb00a8c0@mwhite>, Martin White
<martin@guddler.com> writes
>Didn't we decide that RS still do them, but by a different manufacturer
>and no longer listed under "Ampex Mate N Lok"??
>
>I found some by doing the "gallery" list bit with all the pictures...
i found something in the RS catalogue the 'looked' like them but they
didn't fit - the shaped plugs were pointing the wrong way (

BUT it sounds like Luke has found a source?
---
James G Watt
http://www.kinetic-arts.co.uk
Part of the Video Arcade Game Collectors WebRing.

You are in a maze of twisty little passages, all alike.

 

[zepromz]

RE: [ukvac] [Tech] Connectors - name them.
At 17:36 16/09/02 +0100, you wrote:
>Didn't we decide that RS still do them, but by a different manufacturer
>and no longer listed under "Ampex Mate N Lok"??
>I found some by doing the "gallery" list bit with all the pictures...
>Not being awkward here I truly can't remember if we agreed they were the
>ones or not!

CPC still sell them as "Mate N Lok" and they arent too dear, so why f..k
about with RS?

 

[zepromz]

Re: [ukvac] [Tech] Connectors - name them.
At 17:37 16/09/02 +0100, James G Watt wrote:
>i found something in the RS catalogue the 'looked' like them but they
>didn't fit - the shaped plugs were pointing the wrong way (
>
>BUT it sounds like Luke has found a source?

USE THE SOURCE, LUKE! (sorry, I could NOT resist that one

 

[guddler]

RE: [ukvac] [Tech] Connectors - name them.
Ummm, because I'm sure CPC didn't have a nice online catalogue when I
last looked like they do now, and RS is only a half hour drive away )

________________________

Guddler's Arcade
http://www.guddler.co.uk

>

 

[P-Man]

Re: [ukvac] [Tech] Connectors - name them.
dude

i have lots of them from RS.

you must have ordered the goony ones.. there are several types, NOT made by
ampex, , you need the ampex mate n lok

Andy
> In article <001201c25d9f$2e9cb3c0$fb00a8c0@mwhite>, Martin White
> <martin@guddler.com> writes
> >Didn't we decide that RS still do them, but by a different manufacturer
> >and no longer listed under "Ampex Mate N Lok"??
> >
> >I found some by doing the "gallery" list bit with all the pictures...
> i found something in the RS catalogue the 'looked' like them but they
> didn't fit - the shaped plugs were pointing the wrong way (
>
> BUT it sounds like Luke has found a source?
> ---
> James G Watt
> http://www.kinetic-arts.co.uk
> Part of the Video Arcade Game Collectors WebRing.
>
> You are in a maze of twisty little passages, all alike.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

 

[Swallow]

Re: [ukvac] [Tech] Connectors - name them.
In message <am4lcc+fn7j@eGroups.com>, arcadeukcom <ukvac@jigsawtechnolog
ysolutions.com> writes

Hi,

The male / female refers to the plastic housing. You can then fit male
or female pins to the housing which are bought separately. I have all of
these in stock.

Steve.

>Also are the connectors that I need Male? (because the connectors on
>the board apear to have female plastic but with male pins.
>
>So do I need Male plastics with female pins or what ?
>
>Thanks in advance
>
>Luke

--

Steve Huntley.
Swallow Amusement Machines.
*** Pinball and Videos ***

http://www.coin.demon.co.uk