[Tech] Hantrex MTC900

[LukeWells]

[ukvac] [Tech] Hantrex MTC900
(1) What is the fault that causes the big wirewound white resistor
next to the HT to go black?

(2) I have seen a touble shooting flow chart knocking about
somewhere, anyone got it or know where it is ?

Cheers

Luke

 

[LukeWells]

Re: [ukvac] [Tech] Hantrex MTC900
Yeah I guessed that

I read before that the black resitor means that some sort of protection
circuit has cut in or something shunting all the power through the resistor
to stop damage to something else?

The monitor fires up after I resoldered some dry joints (was dead before)
but makes horrible noises. I think there is HT because i can hear it, but I
get no visible raster.

> LOPT probably bad
>
> > (1) What is the fault that causes the big wirewound white resistor
> > next to the HT to go black?
>
> Andy
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

 

[P-Man]

Re: [ukvac] [Tech] Hantrex MTC900
LOPT probably bad

> (1) What is the fault that causes the big wirewound white resistor
> next to the HT to go black?

Andy