Tech: HN462532G

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
[ukvac] Tech: HN462532G
Hi, anyone know anything about these please?

They really can't be uncommon (Hitachi, found in Falcon CK board).

I've located two corrupt ones and erased them before looking at the list of
devices on my burner DOH!!

Looked at the cross reference sheet on spies, but still none the wiser! So,
don't know what to set the device to for burning, anyone enlighten me??

Guddler.

-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/5/_/5935/_/973469076/
---------------------------------------------------------------------_->
 

P-Man

International man of mystery
Feedback
4 (100%)
Credits
1,273CR
Re: [ukvac] Tech: HN462532G
spot the codename in there?

2532.

used in a lot of games..

easy :)

you should be able ot get replacements easy enough, if not, i might have
some spares, mind you, maybe not many :)

Andy

> Hi, anyone know anything about these please?
>
> They really can't be uncommon (Hitachi, found in Falcon CK board).
>
> I've located two corrupt ones and erased them before looking at the list
of
> devices on my burner DOH!!
>
> Looked at the cross reference sheet on spies, but still none the wiser!
So,
> don't know what to set the device to for burning, anyone enlighten me??
>
> Guddler.

-------------------------- eGroups Sponsor -------------------------~-~>
eGroups eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9698/5/_/5935/_/973472437/
---------------------------------------------------------------------_->
 

PaulSwan

ZZZ
Feedback
1 (100%)
Credits
1,118CR
Re: [ukvac] Tech: HN462532G
There should be a few people on this list who have a few left of the
ones they've had off me in the past. I still have 1,500 but don't have
access to them.

Regards,

Paul.

Andy Welburn wrote:
>
> spot the codename in there?
>
> 2532.
>
> used in a lot of games..
>
> easy :)
>
> you should be able ot get replacements easy enough, if not, i might have
> some spares, mind you, maybe not many :)
>
> Andy
>
> > Hi, anyone know anything about these please?
> >
> > They really can't be uncommon (Hitachi, found in Falcon CK board).
> >
> > I've located two corrupt ones and erased them before looking at the list
> of
> > devices on my burner DOH!!
> >
> > Looked at the cross reference sheet on spies, but still none the wiser!
> So,
> > don't know what to set the device to for burning, anyone enlighten me??
> >
> > Guddler.
>

-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/5/_/5935/_/973534444/
---------------------------------------------------------------------_->
 

Dave2084

Active member
vacBacker
Feedback
7 (100%)
Credits
456CR
Re: [ukvac] Tech: HN462532G
At 00:32 6 11 00, you wrote:
>2532.
>used in a lot of games..
>easy :)
>you should be able ot get replacements easy enough, if not, i might have
>some spares, mind you, maybe not many :)

Paul Swan had 1000's of these for sale at ludicrously low prices at his
meet ...

If only I'd bought more :eek:(

Dave Langley
Williams Documents + More On-line @ www.robotron-2084.co.uk
 

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
You can make an adaptor with two zero-insertion force sockets as good ol' Bob Roberts shows you here
smiley17.gif


http://www.therealbobroberts.net/mspacrom.html
 
  • Like
Reactions: trm

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
..and for reference if you add a couple of diodes as per the Commodore PET vintage computer discussion list below, you can write a 2532 using the 2732 EeProm driver

http://www.vintage-computer.com/vcforum/showthread.php?23775-Bin-files-for-EPROM-burning!/page7

Here's the pin-outs for both chips as further reference:

http://margo.student.utwente.nl/stefan/chipdir/pinusr/2732.txt

Code:
name:         2732
	function:     4kx8 EPROM
	package:      DIL,24
	manufacturer: Intel, Toshiba, Texas, ST...
	added-by:     Marko Virkkula
	
	    +--()--+
	 A7 | 1  24| VCC
	 A6 | 2  23| A8
	 A5 | 3  22| A9
	 A4 | 4  21| A11
	 A3 | 5  20| /OE VPP
	 A2 | 6  19| A10
	 A1 | 7  18| /CE
	 A0 | 8  17| D7
	 D0 | 9  16| D6
	 D1 |10  15| D5
	 D2 |11  14| D4
	GND |12  13| D3
	    +------+
	
	This information was added by a third party and may be incorrect.
	
	This pinout came from the Chipdir:
	http://www.chipdir.org/
Code:
[url="http://margo.student.utwente.nl/stefan/chipdir/pinusr/2532.txt"]http://margo.student.utwente.nl/stefan/chipdir/pinusr/2532.txt[/url]
Code:
[code]name:         2532
	function:     EPROM
	package:      24 pin DIL,24
	manufacturer: many
	added-by:     Corey Stup
	
	    +--()--+
	 A7 | 1  24| Vcc
	 A6 | 2  23| A8
	 A5 | 3  22| A9
	 A4 | 4  21| Vpp
	 A3 | 5  20| /E, /Progr
	 A2 | 6  19| A10
	 A1 | 7  18| A11
	 A0 | 8  17| D7
	 D0 | 9  16| D6
	 D1 |10  15| D5
	 D2 |11  14| D4
	Vss |12  13| D3
	    +------+
	
	This information was added by a third party and may be incorrect.
	
	This pinout came from the Chipdir:
	http://www.chipdir.org/
[/code]

Judder2012-05-23 16:16:12
 
  • Like
Reactions: trm

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
The discussion implies that they can/have...

"Hi Fellas

I've had sucess with my willem to program the 2532 as a 2732.

I found some info off the net but can I find it again!

Anyway what you need to do is make an adapter using two 24 dip sockets.

Connect:-

2532 to 2732

Pin 20 to Pin 18
Pin 18 to Pin 21

Now here's the difference

Connect a diode from Pin 20 on the 2732 socket to Pin 21 on the 2532 socket with the banded end at pin 21.
Then connect a diode from Pin 24 on the 2532 socket to Pin 21 on the 2532 socket again with the banded end on Pin 21.

All the other pins go straight through to each other except pins 18,20 and 21 which are as above.

This set up allows the willem to read and write from this adapter!"

"I'm not sure which diodes I used as I scavenged them out of an old zx spectrum motherboard.

Make sure all pins are soldered straight through except for 18,20 and 21.

Also ensure the diode banded ends are on pin 21 2532 side.

Here's my adapter:-

Hope the above makes sense.

Note this worked on a willem pcb 50 set to 21v using external 12v supply."

2532to27xxAdaptor.jpg


Judder2012-05-23 17:16:43
 
  • Like
Reactions: trm

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
Actually reading the datasheets this kind of makes sense.

The different/swapped around pins is obvious but the VPP (the power required to program) is +25V for the 2532 but only +21V for the 2732

Hooking VPP (21V) and VCC (5V) together on the 2732 set up and joining them to the VPP input for the 2532 would therefore give VCC (26V) which should be enough to trigger the programming of the 2532 chip.

Amazing what one can half learn in a day by scouring the Internet
smiley1.gif


Datasheet for 2532:

http://www.downloads.reactivemicro.com/Public/Electronics/ROM/2532%20EPROM%20Data%20Sheet.pdf

Datasheet for 2732:

http://www.downloads.reactivemicro.com/Public/Electronics/ROM/2732%20EPROM.pdf
 

PaulSwan

ZZZ
Feedback
1 (100%)
Credits
1,118CR
There are two editions of the 2532: 2532 = Vpp 25V and 2532A = Vpp 21V

This is likely not quite right - connecting a 21v line to a 5v line doesn't make 26v :)

Hooking VPP (21V) and VCC (5V) together on the 2732 set up and joining them to the VPP input for the 2532 would therefore give VCC (26V) which should be enough to trigger the programming of the 2532 chip.
 

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
PaulSwan said:
There are two editions of the 2532: 2532 = Vpp 25V and 2532A = Vpp 21V

This is likely not quite right - connecting a 21v line to a 5v line doesn't make 26v :)

So maybe that programmer would work with the 2532A.

For the benefits of the less informed of us, can you highlight what the benefits of adding the 5V line to the 21V line?
smiley1.gif


My limited understanding is that this will only increase the current then...

Judder2012-05-23 18:10:22
 

PaulSwan

ZZZ
Feedback
1 (100%)
Credits
1,118CR
If the two lines are connected through the diodes then it's likely to ensure that the connected signal is 5V when the 5V is on and then 21V when the 21V is on. If both 5 and 21 are on, it'll be 21.

Paul.
 
  • Like
Reactions: trm

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
PaulSwan said:
If the two lines are connected through the diodes then it's likely to ensure that the connected signal is 5V when the 5V is on and then 21V when the 21V is on. If both 5 and 21 are on, it'll be 21.

Paul.

Thanks Paul - that makes total sense and you learn something new everyday!

Not sure why the VPP line would need 5V in read mode (nothing on the data sheet seems to imply it does) but guess that's what putting the diodes there will achieve...

Tempted to build one just to find out
smiley1.gif
 
Top