tech: Is this eprom programmer any good?

[ukvac] tech: Is this eprom programmer any good?
Hi

I have yet to buy an eprom programmer to aid in this
hobby. The main reason is I am unsure what to buy, and
with the prices seeming steep for old ones on ebay, I
don't want to make an expensive mistake.

This one is for sale on ebay.com

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3042692548&category=298

It looks like a home-made from poland!, but it does
seem to have a good list of devices it can program,
and it is also quite cheap.#

I am interested in mainly per Jamma/ early eighties
stuff, would this programmer be any good to me?

Thanks in advance for any advice and help.

Rob

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
 

galaxip79

Active member
Credits
34CR
Re: [ukvac] tech: Is this eprom programmer any good?
> Hi
>
> I have yet to buy an eprom programmer to aid in this
> hobby. The main reason is I am unsure what to buy, and
> with the prices seeming steep for old ones on ebay, I
> don't want to make an expensive mistake.
>
> This one is for sale on ebay.com
>
> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3042692548&category=298
>
> It looks like a home-made from poland!, but it does
> seem to have a good list of devices it can program,
> and it is also quite cheap.#
>
> I am interested in mainly per Jamma/ early eighties
> stuff, would this programmer be any good to me?
>
> Thanks in advance for any advice and help.
>

I wonder if his Windows software is as fun to read as his auction :)

10/10 for trying though.

Looks like an interesting device, as you say, cheap... wonder if this
plus possibly his 16-bit EEPROM adaptors would cover the majority
of board repair/diag requirements?

--
_ _ _a' /( <. # Gaz Wilson, aka DragonLord
/_/ _ _/ / ` / _ ~~ _} ( _ ) # E-Mail: dragon@nightwolf.org.uk
/ /_'/_/ /_, / /_||/|/ (,_(,)' # Info: http://www.dragons.org.uk
Catch me with the Dragons. ._>, _>, # Chat: http://www.redclaw.org.uk/
 
A

andrewhannay

Guest
RE: [ukvac] tech: Is this eprom programmer any good?
Looks like it will do all of the popular game board EPROMs to me and it's a
very good price.
There may be a bit of fiddling with dip switches to select the part and
programming voltages etc.
but the manual might be difficult to read based on the sellers advert (very
dodgy language translator used)
but for less than £50 it's got to be worth a try, If I was desperate for one
I would invest.
Andrew
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
RE: [ukvac] tech: Is this eprom programmer any good?
The only devices that spring to mind that I don't see on that list which I find
useful are the smaller ones like 2732 and 2716 (hell 2708, but my Galep 4
doesn't do them!).

They're listed, but 2716's say Vpp 25v (don't know if that's relevent) and the
2732s are shown as needing an adapter.

If you want to do anything with early(ish) stuff then you WILL want 2732 and
2716 capability...

Gudd.

> Looks like it will do all of the popular game board EPROMs to
> me and it's a very good price. There may be a bit of fiddling
> with dip switches to select the part and programming voltages
> etc. but the manual might be difficult to read based on the
> sellers advert (very dodgy language translator used) but for
> less than £50 it's got to be worth a try, If I was desperate
> for one I would invest. Andrew
>
>
 

John Bennett

Senior Member
vacBacker
Feedback
10 (100%)
Credits
5,325CR
RE: [ukvac] tech: Is this eprom programmer any good?
Adaptors are easy to make. I have a Willem programmer and have successfully
read 2716s and 2732s. There is also a large forum community of people
willing to help with any problems at www.willem.org

The problem is the power supply. To program one of these small devices you
need a power supply that is 24V. The device itself doesn't come with a power
supply. So I have only managed to read the smaller devices and program some
are the more standard devices using a 12v power supply.

I've acquired another programmer now that doesn't have dips that need
changing for each device and can easily program 2716s. So if anyone would
like to buy my Willem programmer from me... £40? ... offers?

Ivan

>

DATA Imported from archives: originally posted by Ivan Mackintosh (ivan@rcp.co.uk)
 
Top