TECH: Phoenix and MK bootlegs

John Bennett

Senior Member
vacBacker
Feedback
10 (100%)
Credits
5,324CR
[ukvac] TECH: Phoenix and MK bootlegs

Hi everyone

Just a couple of quick queries about bootlegs that are giving me a
headache...

First up, a CGI Phoenix boardset. All I can get is a screen full of
static garbage. The fault is definitely on the lower (ROM) board, as
the top board was tested with another set and is ok. The ROMs are all
new, all the IC sockets are new and all the logic levels around them
seem okay using a logic probe. I've also replaced the buffers between
the ROMs and RAM and the data bus with no luck. Could this be a faulty
2114 RAM?? Does this game stick in a never ending loop if it fails a
RAM test, or does it even have a RAM test in the game code? Also worth
a mention is that the game never accesses anything other than the
lowest ROM in the address space, at 0000h, according to the -CE lines
on the ROMs.

Second, an MK bootlg, single board type with a TDA2003 in the top left
corner looking at it with the JAMMA connector down the left hand side.
I think it's a YAWDIM but all I can get is a blank screen, it plays
blind. It's also a fair bit different from the original's schematics
but I have been able to determine where the colour RAMs are and prove
that they're OK. They're just having black written to them all the
time :)

I know a few people are going to say sling 'em in the bin but they're
among the last few non-runners I've got and I'd like to get them
working. I can provide more details if anyone out there is willing to
help me out with them.

Thanks in advance,

Dave



DATA Imported from archives: originally posted by David Smethurst (david@smethurst75.fsnet.co.uk)
 
Top