Tech : Point Blank 2 kit

[arcadeoriginals]

[ukvac] Tech : Point Blank 2 kit
Hello,

I have collected a Point Blank 2 kit. The seller told me it was a never used
kit and I must admit it looks brand new

I have plugged the jamma pcb in my jamma cab and it works fine. I have also
attached the guns, but they need +24V and I don't have that on my power
supply. My guess is that the +24V is just for the feedback and reload
function of the guns (there is a sort of pinball-part in it, I think it is
called a "solenoid").

My question(s) :
Even without attaching the +24V, should the game respond to the gun-trigger?
It doesn't... :-(
Is it possible that the guns don't work on my cortex-monitor and only work
on certain monitors? If so, can anyone confirm on which monitors the guns
will work?

Thanks!
Marco

 

[John Bennett]

RE: [ukvac] Tech : Point Blank 2 kit
Well.. Even if the you can't hit anything on screen when you press the
trigger the screen should flash.. So I guess the next is try hooking up
the +24

Kip



DATA Imported from archives: originally posted by Kip (kip@thedvdproject.com)

 

[John Bennett]

Re: [ukvac] Tech : Point Blank 2 kit
marco i have the manual for this game at work
i know that on namco crisis zone that it comes up with a motor error if the solonoid packs up and this can be skipped in test mode

not sure if its the same for point blank 2 i cant remember
i will see if i can find out for you

sticky



DATA Imported from archives: originally posted by Richard MONRO (sticky@stickyk2.fsnet.co.uk)

 

[arcadeoriginals]

Re: [ukvac] Tech : Point Blank 2 kit
Hello again,

many thanks for all the help, I am pleased to tell that everything works
fine now although I still will have to attach the +24V for the solenoid
recoils, but it allready plays fine

Marco.

----- Oorspronkelijk bericht -----
Van: "Marco Krijger" <originals@chello.nl>
Aan: <ukvac@yahoogroups.com>
Verzonden: woensdag 1 mei 2002 21:14
Onderwerp: [ukvac] Tech : Point Blank 2 kit

> Hello,
>
> I have collected a Point Blank 2 kit. The seller told me it was a never
used
> kit and I must admit it looks brand new
>
> I have plugged the jamma pcb in my jamma cab and it works fine. I have
also
> attached the guns, but they need +24V and I don't have that on my power
> supply. My guess is that the +24V is just for the feedback and reload
> function of the guns (there is a sort of pinball-part in it, I think it is
> called a "solenoid").
>
> My question(s) :
> Even without attaching the +24V, should the game respond to the
gun-trigger?
> It doesn't... :-(
> Is it possible that the guns don't work on my cortex-monitor and only work
> on certain monitors? If so, can anyone confirm on which monitors the guns
> will work?
>
> Thanks!
> Marco
>
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>