[Tech] Space Harrier no sprites

LukeWells

Active member
Credits
334CR
[ukvac] [Tech] Space Harrier no sprites
Hi all, please help!

I have 2 space harrier boardsets complete and working (i.e.
sounds,coins up and respondes to joystick movement)

But both have no sprites

Looking at the mame source code all the sprites (and only the
sprites) are on the small rom board ( I say small but it has 32x
27256's)

I have programmed a complete fresh set of roms for all 4 boards in
both sets as there were 2 or 3 that were bad.

I have tried using different ribbon cables in the connections to the
rom board, but there are absolutely no sprites

Background and text is ok

I can't get to the rom board while it is in the machine (on the back
of the sound board) and the harness is not long enough to give me any
flexability in positioning, otherwise I would probe for CE/OE
activity on the roms.

I just find it strange that both sets have exactly the same fault.

Anyone come accross this before or have any ideas before i have to
rip the hanress out of the cab and turn it into a test rig harness :(

Thanks in advance

Luke



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
 

Ordyne

Active member
vacBacker
Feedback
5 (100%)
Credits
1,282CR
RE: [ukvac] [Tech] Space Harrier no sprites
I doubt this will help but I can tell you that if you unplug the small
romboard (ribbon cable+ power) then everything will work apart from the
sprites so what you've found in the mame source is correct. However you
should still get some random corruption on screen where the sprites
should be so if you're not getting any of that when the romboard is
removed I doubt its anything to do with the romboard itself.

Craig

>
 
Top