simon325836
Active member
- Credits
- 47CR
[ukvac] Techie type question. & games ID
Bored in work as well and I have 4 questions.
1. I received an unknown board yesterday that has an 18 way pinout. If I have the board with the edge connector facing away from me, on the top side(component) the right hand end 2 pins are ground and the left hand 3 end pins are ground. On the solder side the three pins underneath the 3 ground pins are +5v and I think the 2 pins under the 2 ground pins are 12v. I can’t find anything looking like this pinout anywhere. Before you tell me to test it to find the sync and colour outputs, I will do this, but I am bored in work and a bit lazy so I have taken the easy way out and asked here first, and its bugging me at the moment. I am having an op later today so I won’t be able to go probing around in the back of my cab as well.
2. game identification, early game where you were at the bottom and above you were bricks that you had to defend from invaders coming in from the side. I know its in Mame as I have played it but can’t remember what it was called and it will take ages to sort through >3000 games.
3. Another game I reckon from the mid 80’s was an overhead game where you were inside a vehicle and went round shooting things. You could also get out of the vehicle and run over people. It isn’t jackal(konami)
4. Looking for a Devil Fish , check man and a Guttang Gottang ( or equivilant) pcb’s to buy
Thanks
Simon
_______________________________________________________________________
Freeserve AnyTime, only £13.99 per month with one month's FREE trial!
For more information visit http://www.freeserve.com/time/ or call free on 0800 970 8890
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Bored in work as well and I have 4 questions.
1. I received an unknown board yesterday that has an 18 way pinout. If I have the board with the edge connector facing away from me, on the top side(component) the right hand end 2 pins are ground and the left hand 3 end pins are ground. On the solder side the three pins underneath the 3 ground pins are +5v and I think the 2 pins under the 2 ground pins are 12v. I can’t find anything looking like this pinout anywhere. Before you tell me to test it to find the sync and colour outputs, I will do this, but I am bored in work and a bit lazy so I have taken the easy way out and asked here first, and its bugging me at the moment. I am having an op later today so I won’t be able to go probing around in the back of my cab as well.
2. game identification, early game where you were at the bottom and above you were bricks that you had to defend from invaders coming in from the side. I know its in Mame as I have played it but can’t remember what it was called and it will take ages to sort through >3000 games.
3. Another game I reckon from the mid 80’s was an overhead game where you were inside a vehicle and went round shooting things. You could also get out of the vehicle and run over people. It isn’t jackal(konami)
4. Looking for a Devil Fish , check man and a Guttang Gottang ( or equivilant) pcb’s to buy
Thanks
Simon
_______________________________________________________________________
Freeserve AnyTime, only £13.99 per month with one month's FREE trial!
For more information visit http://www.freeserve.com/time/ or call free on 0800 970 8890
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/