Time Crisis Texture Bug

argonlefou

Newbie
Credits
7CR
Hi everyone,

I got a Time Crisis Standart cabinet a few days ago, and everything works fine except a small bug affecting some textures :

Snap1 : a wooden Door (my cab on the left, Mame on the right)
Snap2
: The sky (my cab on the top, Mame on the bottom)

Snap3
: Brown soldier + left wall (my cab on the left, Mame on the right)

And so on...

I opened the system super 22 case, extracted and cleaned the cards, re-inserted them correctly but it is still buggy...so a card must be out of service.

I'm looking for people possessing a fully working Time Crisis cab, and willing to take pictures from the video pcb tests in the service menu, so that I can compare my results with a working one
This might tell me if the video PCB is good or not....

Or if someone has any idea on how to find the problem, I'd be glad to hear it !
smiley17.gif


Thanks !
argonlefou2011-06-18 09:35:48
 

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
Hi dude,

Some excellent troubleshooting preparation there - if only everybody would provide as much detail on the fault
smiley1.gif
. Unfortunately, I think this is going to be a problem to fix. I'll wait for a TC owner to chip in but I think these have the same fault affecting other 90s 3D boards in that the custom ICs which do the video suffer from corroded or lifting legs and the only fix is to steal parts from a working donor board :(

Can you get some pics of the board stack? Specifically interested in any big surface mount chips and their legs to see if there's any obvious corrosion/contact damage.

cheers

tim
 

argonlefou

Newbie
Credits
7CR
Thanks for answering !

If the problem really comes from namco's custom video IC, it sure would be difficult to fix, but that would be a big step as 1)the faulty pcb (out of 4) would be identified and 2)The video board is common to all system super 22 game (so much more easily findable spare)

Anyway, here's a link to imageshacks album, hosting photos for all 4 boards.
Unfortunatelly, the overall condition of these is very good, and there is no sign of corrosion at all
smiley18.gif
 

G-man

Active member
Feedback
3 (100%)
Credits
181CR
Probably one of the video rams gone bad. Repaired similar texture issues on model 3 step 2 video boards. Namco's video boards are pretty easy to find though?

G-man2011-06-21 06:32:04
 

argonlefou

Newbie
Credits
7CR
I may have a contact or two to get spare Video PCB.
But I'd like to locate as precisely as possible the faulty component, as there is only 1 Video PCb on the case, but there are game specific components on two other boards in the case...

I'd rather be certain that it is not a Time Crisis rom ( containing some texture or anything else) as I'd rather not spend money in spare PCB if it is not the one broken
 

G-man

Active member
Feedback
3 (100%)
Credits
181CR
You can check the roms first and rule that out.

Is this a game you're going to keep? I always like to have a spare boardset (or two) available for this kind of troubleshooting. For my model 3 stuff, I have a ton of boards, some working some not so that in the event of a fault I can very quickly get the game up and running again.

These boardsets are only going to get more and more difficult to get hold of and consequently more expensive. Since my model 3 games are keepers, I figure this is a good strategy. I appreciate that some dont like having 'spares' hanging around, I guess it depends on whether you will keep the game or not.

The problem I think you're going to have is, troubleshooting the video board whilst it's in the 'stack', without extension cabling etc. I had to make up some cables for my boards to work on them. Although it looks like it's ribbon cables to connect the boards so you might be in luck.
 

argonlefou

Newbie
Credits
7CR
I'd like to be able to check Roms, but as Namco wanted to make repair "easy", they are all surface mounted
smiley11.gif


I tried to modify .bin files from mame Zip, and one in particular makes glitchy textures when partially modified with blocks of "00" instead of original Data.
So I guess (but I could be wrong) that a problem on this Rom is an option too, as well as a problem on the video card ...
Someone should send me some screens of a working video PCB test, I may have a chance of discarding the option of the faulty video card then and thus, focusing on a replacement GameRom PCB

As for spare, yes I plan on keeping this game, and that would be nice to have some replacement parts.
It's just that not having a fully working game does not yet allow me to test any "said to be working" spare pcb.
 

Stone

Newbie
Feedback
1 (100%)
Credits
47CR
As argonlefou has found out from my pics, the PCB self-test on these boards is utterly useless!

All my dead /faulty sets have been due to a duff video PCB (2/3 not working correctly!) so that's where I'd start.
 

argonlefou

Newbie
Credits
7CR
Hi !
Good news : at the end, I managed to get some spare for every PCB in the cab.
Surprisingly, my video PCB is good, and the faulty one was the MROM PCB (of course, the rarest one as it is totally Time Crisis specific ! )
Swapping it with the spare solved the problem
smiley1.gif


As for "where" my MROM PCB is faulty, I'm not going to investigate right now as I have no sufficient tools to do so....

I hope this little experience will be able to help someone in the future !
argonlefou2011-07-20 19:37:13
 

luchex

Newbie
Credits
6CR
Hi! How are you? I'm writing from Argentina, sorry for my English! =S I've been reading your post because I¡, having problems with my Prop Cycle, which also uses Namco System Super 22. I'm a bit lost, it display graphic textures/polygon glitches in almost all the screen, except at the right, where graphics are shown well. What could be happening? Any clue? Thanks a lot for reading, cheers! ;)
 
Top