Time Crisis

paulcan69

Can reburn OTP EPROMs! Fear my power!
Feedback
11 (100%)
Credits
945CR
Hello

Please help!!

Due to the amazing kindness of Mini I have adopted a Time Crisis cab
It's stuck in a reboot loop

Passes everything as ok
But gets stuck on...

SUB CPU Wait then says NG (very quickly) meaning no good

Reading online it was saying gun pcb
But this looks like time crisis 2 and not the first game

But in the mame world they had this error and I think it was to do with NVRAM
pressing service then reset cleared the ram and the game would boot?

I have tried holding test and pressing service and evening holding every combo of those buttons even with a power on/off

Any ideas?
Could some clever chap explain if they agree with all that
And could explain the NVRAM to me please?

Here's a link to the mame side of things (any mame heads on here??)

click me

paulcan692014-12-01 20:11:22
 

paulcan69

Can reburn OTP EPROMs! Fear my power!
Feedback
11 (100%)
Credits
945CR
Thanks to Joel RETROREPAIR for the link
He's spot on with the exact error
That's what my cab does, just a constant reboot loop of that
 

Smraedis

Active member
Credits
105CR
Hey, I'm currently trying to get my TC1 board playing properly.
I had a very similar issue, it kept on restarting once it got to the SUBCPU like this.

I cleaned all the PCBs and put it all back together and it now comes on.

The current issue on mine is the "invalid value" on calibration screen...
 
Top