TnF Diagnostics

shoestring

Newbie
Credits
159CR
The beeps. It should play 5 for bad vidram, 6 for bad colour.

The way it was, you'll only hear 3 for bad vidram & 4 for bad colour on real hardware, I need to play with the timing to get them all out.

I think you should hear all intended beeps now in Test 1.0

Test 1.0

http://www.pastefile.com/5ZCmjdshoestring2015-08-16 00:59:28
 

shoestring

Newbie
Credits
159CR
Purity said:
Anything else you need me to look at ?

I probably have some partial faulty 2114's in my junk pile.  I can swap the good ones out for the faulty ones if you want me to see what happens?

It's really up to you. I think you've done so much already & I appreciate your help and everyone elses.

Caius has recently purchased some faulty boards and is going to do a thorough test on it as well.

Edit: I think I should suspend further checks if video or colour ram is bad ( since nothing can be seen on the screen / worst case scenario ) because someone is bound to be pissed off if high scores are erased.shoestring2015-08-16 01:13:01
 

shoestring

Newbie
Credits
159CR
I'm still seeing that CHK being generated on the hyprolym set.

Hex work shop also generating the same checksum ( for rom1 ). Send me your hyprolym set if you still disagree.

9e79.png
shoestring2015-08-17 01:23:30
 

shoestring

Newbie
Credits
159CR
Same thing will happen if you put rom1 in socket 5 but I just fixed both of these issues.

Edit: Well actually it's not possible to swap rom A5, see explanation in next post regarding reset vector.

Good thing the 502 works. They can be hard to replace.

Maybe it's time to look at the supporting ttls around the 502 ?
shoestring2015-08-18 05:35:02
 

shoestring

Newbie
Credits
159CR
Just a small important note.

The A5 rom needs to remain in socket5A. This is because the reset vector is obtained right at the end of this rom.

Edit: having thought more about this I've decided to re-write the test rom so that it installs in socket 5a. I will be able to set the reset vector
and free up the first 4 sockets ( 1a,2a,3a and 4a ) for the rom utility.

Main reason for this change is that if A5 is bad, there's a chance that the game/test rom will boot to garbage if the reset vector is corrupted. Having direct control over the reset vector is the best way forward.
shoestring2015-08-19 03:21:42
 

shoestring

Newbie
Credits
159CR
Latest TEST 1.1

http://www.pastefile.com/wZNsqb

test_1.1.png


Test ROM now installs in SOCKET 5A as proposed.

This allows sockets 1a - 4a available for swapping out roms. ROM A5 can be tested in any of the first 4 available sockets.

Much less confusing and more useful now.
shoestring2015-08-19 03:23:02
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
Cool will check that out.

BTW I found the issue with my runners. I now have them back!

I notcied some stuck pins on two of the eproms, and traced this back to a faulty LS04
Purity2015-08-20 14:00:54
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
The new rom seems fine in 5A. I agree that it seems a more convenient place to put it

The 74LS04 had no markings on it, so strangely not a Fujitsu this time :)

Still need to fix the issues wth the background, and text. It still is not right. Might be more trickier as it is actually showing content

Purity2015-08-20 22:18:22
 

shoestring

Newbie
Credits
159CR
Great. I did update JAMMArcade already with this test version only, I won't release it as BETA until I'm 100% sure because it was a large enough code change even though it passed all my test cases. You just never know on real hardware.

How about the sound alerts for video/color ram? Are you hearing 5 or 6 depending on which is pulled ?shoestring2015-08-20 22:59:11
 

shoestring

Newbie
Credits
159CR
Test is the latest. But I will move it into beta since it
appears to be fairly happy in the other socket.

Nvram test is automatic. You can turn it off / on
via dip or wait for the countdown.

I think you're asking about how to enter the diagnostic mode?

What's your actual problem ?
 
Top