Track Field help

rascaluk

User
Feedback
2 (100%)
Credits
19CR
Hey guys,

Recent noob to arcade pcbs but I have more than a vague idea of what I'm doing so it's a start.

Anyhow, have picked up a Track & Field that I'm told was working but there are graphical issues. Sprites all seem fine but there is no background. No track or field for that matter.

Any pointers as to where I should start first?

I think it had a rough ride in the post so I am going to reseat chips etc for starters.

Also, it boots as Hyper Olympics; is there a way to make it boot as Track & Field? Does it need a different chip?

Cheers,

Paul
 

cmonkey

Active member
vacBacker
Feedback
4 (100%)
Credits
1,659CR
These 5 main cpu roms :-

maxresdefault.jpg


and these 2 tile roms :-

TrackField.pcb.jpg
 

rascaluk

User
Feedback
2 (100%)
Credits
19CR
K that looks simple enough. Will have a crack when I get it working perhaps. Just use the roms from the Mame set?

Another quick question?

On my board, the chip on the top right of your pic is just an empty socket on mine. What should it be?
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
That's a Konami custom @ 16A. Off the top of my head I think it is a 502?

If that is missing no wonder you are having issues

EDIT: It's a 502
Purity2015-08-06 14:54:42
 

cmonkey

Active member
vacBacker
Feedback
4 (100%)
Credits
1,659CR
The chip at the top right is the Konami 502 custom, which is part of the sprite generation circuit. I'm amazed that the sprites are present if this chip is absent!!

Yes, you can use the MAME roms.
 

rascaluk

User
Feedback
2 (100%)
Credits
19CR
tf.JPG


This is mine. The guy is insisting it boots fine and was his pride and joy and he's played with it for a couple of years?

I'm assuming these are a bitch to get hold of?

(thanks for the help boys too)
 

rascaluk

User
Feedback
2 (100%)
Credits
19CR
Yeah I could play (only tried 100m). The scoreboard was there albeit looked weird and there was no track etc but the runners looked fine. Colours were okay etc.

Can't take a pic now as I'm been dismantling stuff...

Am I screwed then does it look like?

rascaluk2015-08-06 15:03:02
 

cmonkey

Active member
vacBacker
Feedback
4 (100%)
Credits
1,659CR
Ah, you've got the TTL daughterboard replacement for the 502, that explains how you've got sprites. If you look at the original pic I posted you'll see there's no daughterboard, just the 502. Sometimes Konami put TTL daughterboard replacements instead of the custom (presumably if they were running low on customs).
 

rascaluk

User
Feedback
2 (100%)
Credits
19CR
Aha, phew. Although I can't get any signal at all from the fecker now. Let alone background.

I've just emptied the box it came in out as well and found a "contraption" which nearly got chucked.

Pic incoming. I have no clue... or even know if it was suspposed to be in there. There's a small board with several ICs on soldered to a large edge connector.

It's not the Jamma converter, that was attached.. hang on
 

cmonkey

Active member
vacBacker
Feedback
4 (100%)
Credits
1,659CR
Dunno what the hell that is? 4MHz Z80 + 16Kb rom + a couple of 8 bit latches. Based on the fact that most of the components on it are dated '90/'91 then I'd say it's nothing to do with the T&F board, but maybe someone else will come along and prove me wrong.
 

rascaluk

User
Feedback
2 (100%)
Credits
19CR
Okay so I'm passing time looking into burning some roms to Track & Field it up while I wait for some bits to arrive.

The chips (D11 D12) etc in the same model are impossible to find. I haven't looked at the other five at this stage. I'd rather not erase the originals if poss.

Can somebody point me in the direction of which eeproms to replace them with, or should I just use the originals. I've taken D12 out and backed it up with my programmer and compared the hex to the Mame rom and it's identical so I guess I could just do that...

Apologies for the noobishness
 

cmonkey

Active member
vacBacker
Feedback
4 (100%)
Credits
1,659CR
You don't the exact same type of eprom, any old 2764's will do, as long as the access time is as fast as (or faster than) the original eproms.
 
Top