Track Field help

rascaluk

User
Feedback
2 (100%)
Credits
19CR
Okay, so I replaced D13 and D15 as I had a couple of spare eproms left lying about. Sound is back. Different this time.

There's a high pitch and also a repetitive "bassline" which is different from the last one. It actually sounds like the first few notes of Chariots of Fire so I thought for two seconds I was almost there.

Absolutely nothing other than that though. Coined up, entered name and started race nothing. No deviation in audio output for the speech, starter pistol etc...

Like you say, it's not the amp I don't think as the sound is constant and I can change the volume with the pot.

Looks like a logic probe job?

rascaluk2015-08-11 07:46:09
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
rascaluk said:
Okay, so I replaced D13 and D15 as I had a couple of spare eproms left lying about. Sound is back. Different this time.

There's a high pitch and also a repetitive "bassline" which is different from the last one. It actually sounds like the first few notes of Chariots of Fire so I thought for two seconds I was almost there.

Absolutely nothing other than that though. Coined up, entered name and started race nothing. No deviation in audio output for the speech, starter pistol etc...

Like you say, it's not the amp I don't think as the sound is constant and I can change the volume with the pot.

Looks like a logic probe job?

You burnt new Track and Field sound roms?
 

rascaluk

User
Feedback
2 (100%)
Credits
19CR
Purity said:
You burnt new Track and Field sound roms?

Yeah. If anything, get more "musical" noise now but also a couple of times I have turned it on I get different sounds.

It's still repeating over and over but occasionally a reboot gives it a different tone.

I'm still not totally convinced it's not the way the Jamma adapter is wired up, just because if I do different things like swap the speaker wires etc I get a different tone again but the guy I got it off reckoned it was working fully so I guess I have to go off that....

So what I have so far:

It's outputting sound

It's the same sound (although an occasionaly different one on a different reboot) pulsing pretty much once a second

Usually accompanied by a high pitch almost whistle or occasionally a hum

This never changes regardless of attract audio on/off, coin up or gameplay. It's not like it is trying to play audio and it's just wrong/distorted...
 

rascaluk

User
Feedback
2 (100%)
Credits
19CR
2C and 3C

I have a 2764 at 2C and nothing at 3C??

Did you mean

2D and 3D?

They look like 2114s

ics.JPG


rascaluk2015-08-11 08:57:17
 

rascaluk

User
Feedback
2 (100%)
Credits
19CR
Had the pleasure of meeting Purity/Ben at his home arcade today and he fixed my board within an hour. Just wanted to thank him for his time and sorting out the audio problem (wonky sockets on the roms) which he replaced for me.

Cheers mate. I owe you one.

Paul
 
Top