Triforce graphics error

slowcade

Active member
Feedback
1 (100%)
Credits
204CR
I have a Triforce (new type) with a graphics error. There are vertical black bars on the screen. I've tested it in two Naomi cabinets, and the error is present in both of them.

Could it just be some dip switch setting, or is it something more serious? I couldn't find much about this, except one guy on AO with the same problem and a YouTube video.

triforce_error.jpg


I guess the Media board error just means that I don't have a game in it, right?
smiley18.gif
 

slowcade

Active member
Feedback
1 (100%)
Credits
204CR
Thanks! It's amazing what help you can get in this forum.
smiley1.gif


I disassembled (and reassembled) the whole thing a couple of weeks ago. Do you remember which of the ones I've marked with letters it is? I'm hoping that it's something simple to replace, like A.. and not C.
smiley36.gif


triforce_bottom.jpg
 

obcd

Active member
Credits
3,830CR
You get error 26 when there is no security pic installed or when the installed security chip isn't working. The newer chihiro 3 (and triforce as well I remember reading) don't work with some of the netboot pic's that are sold on Ebay. The Mame pic code that floats around on the internet doesn't work with them either.
 

slowcade

Active member
Feedback
1 (100%)
Credits
204CR
retrorepair said:
From memory it's "A". The datasheet is online IIRC so you can check it is the one.

I'm not able to find a datasheet or manual.
smiley9.gif


I found a Virtua Striker 2002 manual, but that only mentions the old type Triforce. If anyone has a datasheet or manual, please let me know. Or else I'll just look at the PCB and try to order the correct chip.
smiley1.gif
 

slowcade

Active member
Feedback
1 (100%)
Credits
204CR
tb2000 said:
If the problem hadn't already been diagnosed as an RGB amp fault i'd have been convinced it was a monitor fault!

I play Naomi games on those two monitors, so I was quite sure that they were not the problem.
 

Ordyne

Active member
vacBacker
Feedback
5 (100%)
Credits
1,282CR
Unfortunately it's current hardware so if I post the info I've worked out I'm just going to put myself out of business, especially as some operators have started checking the forums for info to cut costs.

If it was something obsolete I'd have gladly posted all the info.
 

slowcade

Active member
Feedback
1 (100%)
Credits
204CR
A big thank you to forum member Ace` for repairing this! He offered to do it for free, and you can read all about it on his blog (which is one of my favourites, by the way).
smiley1.gif

It turned out it was something in the RGB amp area after all.
I could never have done this on my own, and I would have been stuck with a faulty Triforce if it wasn't for his generous offer.
The picture is absolutely beautiful now! (I'm sorry that my phone camera photo doesn't show it, but trust me when I say that it's perfect).
smiley20.gif


9_triforce_nice.jpg
 
Top