Calling any Midway TRON owner that can take a couple of photos for me please.
I'm doing up a Zacarria TRON but the wiring on the CP is a bit trashed:
As you can see, the ground wire around the buttons and stick is mostly there but everything else just looks a bit botched.
On the other end is one of those 2 row 0.1" Zac connectors. I'd like to convert it back to midway wiring - in case I ever had to drop a replacement panel onto it, i'm more likely to find a Midway wired panel than a Zac wired panel.
Could anyone take a photo of the back of the panel like the above, and the connector that links it to the harness and i need to know what goes where ideally.
I know this could be a big ask but the wiring plan isn't actually in the manual for the game just says - to control panel but nothing says what plug type.
I am assuming Mate & Lok - a cocktail has a 12pin and 15pin but I assume lighting is sent down that as well.
If nobody can help I can mimic the cocktail wiring just appreciate some help here.
I'm doing up a Zacarria TRON but the wiring on the CP is a bit trashed:
As you can see, the ground wire around the buttons and stick is mostly there but everything else just looks a bit botched.
On the other end is one of those 2 row 0.1" Zac connectors. I'd like to convert it back to midway wiring - in case I ever had to drop a replacement panel onto it, i'm more likely to find a Midway wired panel than a Zac wired panel.
Could anyone take a photo of the back of the panel like the above, and the connector that links it to the harness and i need to know what goes where ideally.
I know this could be a big ask but the wiring plan isn't actually in the manual for the game just says - to control panel but nothing says what plug type.
I am assuming Mate & Lok - a cocktail has a 12pin and 15pin but I assume lighting is sent down that as well.
If nobody can help I can mimic the cocktail wiring just appreciate some help here.