TRON : Rom error 5...

mez

Newbie
Feedback
2 (100%)
Credits
8CR
Hi everybody ! I hope someone could help me :

Yesterday i've turned on my TRON [bally midway] cabinet and...

tron.JPG


-Quickly readed the instruction manual but found nothing.

Wanna make a rom ram test but :

-My test switch in front doesn't respond,

-The dipswitch of the pcb doesn't respond...

I will probably need to change a chip but wich one ? Any idea ?

thanks for your help !

mez
 

edwoodjnr

Active member
vacBacker
Feedback
2 (100%)
Credits
246CR
Google is your friend, try searching for Tron Rom error D5. There is a post on KLOV that refers to a service bulletin from 1982-09-16 about replacing D5 with the same ROM version (6/15, 6/17 or 6/25).

Regarding the test switch, mine doesn't work when the game is switched on. I have to power down then flick the switch and then power up and it starts in diagnostics mode.
 

mez

Newbie
Feedback
2 (100%)
Credits
8CR
Thank you for your answers.

Yes the "D" looks like "O", funny.

I will look for my ref. to buy a "new" one.

Or maybe it can be burned i don't know.
 

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
D5 is on the Super CPU board and yes it can be easily burned to a replacement EPROM

It can be either a 2564 or a 2764 depending on how your board is configured (see page 6-7 of the Tron manual - link below) so you'll need to work out what yours is to replace it.

The easiest way to get into test mode is to activate the self-test switch inside the coin door, and then activate the tilt switch located on the back side of the coin door just below the lock mechanism (see page 3-2 of the Tron manual)

The RAM/ROM test on the Sound I/O board is for testing the Sound I/O board only (see page 2-5 of the Tron manual) and is activate by setting SW#2 on switch no. 3 at D14 to ON

I can probably burn you a replacement if you need one if you can't find anyone more local
smiley1.gif


Tron - Part and Operating Manual

http://www.arcade-museum.com/manuals-videogames/T/Tron.pdf

Tron board reference / identification

http://users.skynet.be/zx81/html/closer_tron_pcb.html
 

mez

Newbie
Feedback
2 (100%)
Credits
8CR
Thank you very much !
It is :

-D2764-4

-F21451710S

-PGM @ 21v

-intel 81

a friend will probably burn it soon but thank you again for your offer Judder.




Why does a ROM deleted itself like this ? The sticker doesn't protect it from UV-ray ?




TRon%2520PCB%2520ZAmoth.JPG







 

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
Great - so you have a 2764 EPROM there - that's good as they are pretty common

I would suggest (if you haven't done already) to very gently remove the current D5 chip, check it has clean connections for it's legs, and then firmly replace it and push it firmly into the socket it came from (* remember the 'notch' goes to the top the same as the other ones)

While you are there why not install the Tron "FreePlay" chip at D2 too if you can get your friend to burn one of those
smiley4.gif


http://www.arcadecollecting.com/hacks/tron/

Judder2014-09-26 11:36:30
 
  • Like
Reactions: mez

zamoth

Newbie
Feedback
1 (100%)
Credits
15CR
hi all !!!

where did you know where is REV ?

version to injected eprom D5 ?

code bin mame right witch one any link ?

thanks ZAmoth

zamoth2014-09-29 16:54:26
 

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
zamoth said:
where did you know where is REV ?

version to injected eprom D5 ?

code bin mame right witch one any link ?

Each of the Eproms on the boards are dated with a little date stamp to say when they were made / programmed - this is the REV version

You can see it on the picture below where the top (original) chip is labelled "6-25" (vertically on the right hand size) - this is the Revision

Tron156_small.jpg


Here's another guy who did the Freeplay upgrade and he's got some pictures for reference
smiley4.gif


http://www.720zone.com/Tron-Restoration.html
 

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
zamoth said:
where did you know where is REV ?

If you look very closely at the picture of your board you can see that D3 and D3 EPROMs are labelled

JUN 17

D2 also has a hand written date which looks like '4 17' but I guess is probably also '6 17' for June 17

that is the Revision which needs to match when you are replacing EPROMs
smiley2.gif


TronROMsCloseUp.jpg
 

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
mez said:
Thank you very much !
It is :

-D2764-4

-F21451710S

-PGM @ 21v

-intel 81

a friend will probably burn it soon but thank you again for your offer Judder.

Mez - I put a replacement 2764 ROM D5 (error message) and 2764 ROM D2 (free play) in the post for you yesterday.

Might take a few days to get to France but should hopefully sort you out
smiley4.gif
 
Top