Troubleshooting MTC900E

Big Phil

Captain Phil
vacBacker
Feedback
12 (100%)
Credits
538CR
It's reading 6.3 now. Sorry I may have done it wrong.

Still nothing anywhere else though
smiley5.gif
 

pulstar

Active member
Feedback
41 (100%)
Credits
459CR
Still quite high, voltage drop should really be between 0.4 and 0.9 at the very most when checking with a diode test. And like Purity says there should be a reading between the Base and Collector so I would suggest replacing that and going from there.
 

astaroth

User
Feedback
2 (100%)
Credits
100CR
Hi mate,

I thought i had bought two of these but it looks like i bought one.

I have the old one still. I'm not sure if it was my problem or not, but here are the readings for someone more in the know to tell if it is ok or not:

B + C - 0.454
C+ B - OL
B+ E- 0.523
E+ B- OL
E+ C- OL
C+ E- OL

If this is a worker i'll pop it in the post for you.
 

astaroth

User
Feedback
2 (100%)
Credits
100CR
Didn't manage to get it out today mate. My shed arrived today so have had to put that up. 6x4 yet it still takes 3 and a half hours!

Aiming to do it tomorrow.
 

Big Phil

Captain Phil
vacBacker
Feedback
12 (100%)
Credits
538CR
Got the part, fitted it and still the same. I tested it before I fitted it but I was getting the same readings as I was with the one I removed. Guess I'm doing it wrong
smiley5.gif


Next step?
 
Top