turtles pcb problems please help

Feedback
4 (100%)
Credits
16CR
Hi all I bought a turtles pcb board 3 days ago from a seller on here but it has now decided to not work right and I was after some advice. After playing for about 20 minutes the sound went distorting and tge colours on the screen went weird. It wasn't the monitor as I plugged in other games and they were fine please help
Thankyou mike hodson2014-09-07 16:18:03
 

shep

Active member
vacBacker
Feedback
10 (100%)
Credits
377CR
I remember having trouble with a Turtles PCB once with the sounds distorting (not colours though). It seems a lot of people have problems with the sound. It's a nightmare because I don't think anyone has really got to bottom of the problem. Some have swapped parts and the problem has gone away only for it to return again. See this long thread as example:

http://forums.arcade-museum.com/showthread.php?t=8260&page=6

I couldn't find anything wrong with my PCB. In the end I think I decided that it was my monitor that didn't like the output from the board. I was using a test monitor with built-in speakers. I turned the volume down on the Turtles board and the volume up on the monitor and I think the sound problems went away after that.
 

shep

Active member
vacBacker
Feedback
10 (100%)
Credits
377CR
I replaced the op amps on my board but it didn't fix the problem. The guy in thread also replaced them right at the end of the thread and no fix. I think something unusual was happening with the PCB I had.
 
Top