Tv universal remote control codes

virtvic

The Cabaret King
Feedback
21 (96%)
Credits
2,012CR
Not sure if this is the correct place to post?

I am using a decased 14” tv in a cab. It has an EXCELLENT picture, however the image is a little high on the horizontal.

I do not have the original temple control (never did have it) I also deceased it a few years ago and can’t remember what brand it was. I bought an RM-133E Universal remote control, which you need a 3 digit code for the brand you have.

Is there anyway of identifying the tv make from just the chassis? It has ‘Nixon’ on the pcb and the main IC is Orion.

???
 

robotech

Active member
vacBacker
Feedback
4 (100%)
Credits
823CR
Most universal remotes have a self learning mode
Usually two buttons to cycle through the codes untill the crt switches to stand by then the power button

The old sky remotes will control most TVs and have the same feature
 

RygarR

Active member
vacBacker
Feedback
3 (100%)
Credits
413CR
virtvic said:
Not sure if this is the correct place to post?

I am using a decased 14” tv in a cab. It has an EXCELLENT picture, however the image is a little high on the horizontal.

I do not have the original temple control (never did have it) I also deceased it a few years ago and can’t remember what brand it was. I bought an RM-133E Universal remote control, which you need a 3 digit code for the brand you have.

Is there anyway of identifying the tv make from just the chassis? It has ‘Nixon’ on the pcb and the main IC is Orion.

???

If you have it decased anyway, you'd be as well adjusting the picture using the pots on the pcb. Depending on how old the telly is, it might not have a hidden service mode.
 
Top